Sietas News

French shipping company Brittany Ferries has terminated its contract with German shipbuilder Flensburger Schiffbau-Gesellschaft (FSG) for the construction of a liquefied natural gas (LNG) fueled RoPax ferry, the shipyard announced Thursday.Stefan Denkhaus, general representative of FSG, said, “We cannot understand the customer’s decision, and the termination came as a surprise. According to the calculations of all experts, the completion of the 774 will take 11 to 12 months. The customer…

Pella Sietas, a shipbuilding company in Neuenfelde, Hamburg, has secured a EUR100 million ($111Mln) order from Russian authorities for a new icebreaker described as the biggest ever built in Germany.The new icebreaker, "Eisbrecher7", with a length of 120m, a width of 27.5m and a draught of 8.5m, is the largest single order in Pella Sieta's company history. The icebreaker is part of the Russian fleet modernization program which, as a special vessel, not only keeps sea routes clear but also provides pilot service for large ships in ice, towing ships and other floating structures. It also offers the possibility of fire fighting, sea rescue and deck cargo transport.

Dutch-based transport company A2B-online Container B.V. has added a fourth weekly sailing on its service between Hutchison Ports London Thamesport and Moerdijk in The Netherlands. The new sailing is inaugurated today (18 April 2018) by the first call of the m.s. A2B Spirit (ex-Norfeeder), a Sietas 151 type 508 TEU container ship, the fourth of this class owned and operated by A2B. Commenting on the new sailing, Clemence Cheng, Executive Director Hutchison Ports, said:“London Thamesport offers its customers a service tailored to their specific demands. We are seeing a growing demand in the short-sea container market as a response to increasing labour shortages in the driver-accompanied market and uncertainty around Brexit.

Stena RoRo has reached an agreement with the Finnish shipping company Godby Shipping to long-term charter their three RoRo vessels Misida, Misana and Miranda. The configuration of the vessels is very flexible and they can thus be employed in both the Stena RoRo and the Stena Line networks. Three easy accessible RoRo decks enable fast turnaround in port and this, combined with their high service speed, satisfies the demand for punctual high-frequency service. “We are very satisfied with the agreement, which we believe is clearly in tune with the times in relation to the market situation. We note that growth in our niche is good and we are optimistic about the future”, says Per Westling, Managing Director, Stena RoRo.

German shipbuilding has made a significant turnaround. The country’s shipbuilding industry has seen increases in the number of employees, orders and deliveries compared to 2013, according to the German Shipbuilding and Ocean Industries Association (VSM). The special shipbuilding sector drove this growth, as 20 of the 34 delivered new builds could be classified as high-quality special vessels or naval units. Although VSM announces its annual balance officially in May of each year, MR was able to obtain some early insights into the results.

The German shipbuilding industry has a world market share of around one percent. This is certainly in another league compared to China, South Korea and Japan, which divide the global shipbuilding pie of containerships, bulk carriers and tankers among themselves. But the German shipyards are on top in Europe. Here, around 90,000 people in the shipbuilding and supply industry are employed, and the German maritime cluster remains in strategic and symbolic importance. Aside from the Norwegians…

SAL Heavy Lift has added two ships of Type 116 to its fleet to serve clients with lift requirements of up to 900 mtons. MV Calypso and MV Amoenitas are equipped with two cranes of each 450 mtons and have the highest ice class. As SAL's type 183 and 176 vessels are well planned ahead, the fleet's expansion with type 116 responds to the growing demand for its mid-range services on the part of customers worldwide. Owing to this large number in requests, the first voyages of both ships are already fully booked: MV Amoenitas has left Masan, South Korea, and travels to the Black Sea port of Mangalia in Romania carrying a cargo of engines. On the way there, the vessel made a port call in China to load three tugs weighing up to 685 tonnes each, which were discharged in Myanmar.

SAL Heavy Lift, one of the world’s leading heavy lift vessel operators, has added two ships, Calypso and Amoenitas, to its fleet to serve clients with lift requirements of up to 900 metric tons. SAL's type 183 vessels and 176 vessels are well planned ahead, so SAL's expansion with type 116 responds to the growing demand for its mid-range services on the part of customers worldwide. “As our vessels are in great demand, and we feel that this demand will continue to grow, now is the right time to expand,” said Lars Rolner, Managing Director of SAL Heavy Lift GmbH.

Van Oord is holding a two-day event along the Rotterdam Wilhelminakade quay to mark the entry into service of Aeolus, its first transport and installation vessel for the construction of offshore wind farms. Today, business relations have the opportunity to inspect the vessel. On Saturday 21 June, Mrs K. Aboutaleb-Erahoutan, wife of the Mayor of Rotterdam, will be naming the vessel in the presence of guests and Van Oord staff. The vessel was built at Sietas, a German shipbuilding yard in Hamburg. The innovative and advanced transport and installation vessel has a length of 139 m, 38 m in the beam, a design draught of 5.7 m and a cruising speed of 12 knots. The vessel is equipped with a crane that can lift more than 900 tonnes and has accommodation facilities for 75 crew.

It is a first in the German shipbuilding industry; the Aeolus, the first jack-up vessel for offshore wind farms designed and built in Germany, which was constructed at Sietas Shipyard for the prestigious Dutch marine engineering company Van Oord, has left the shipyard. Having passed through the Este barrage of Hamburg port, the jack-up vessel now travels along the river Elbe to Bremerhaven. Berthold Brinkmann, administrator at Sietas Shipyard said, "I am proud of what the employees at Sietas shipyard have accomplished with this ship.

After an intensive search of over two years, the insolvency administrator, Berthold Brinkmann, has found a strategic investor for the renowned Sietas Shipyard in Hamburg: Pella Shipyard from Otradnoye near St. Petersburg, Russia is taking over the company as of March 10, 2014. The purchase agreement with the Hamburg-based company Terraline GmbH, a member of Pella Shipyard Group, has already been concluded and officially certified by a solicitor, but is still awaiting approval by the creditors’ committee and banks. Following the takeover, Terraline will be renamed Pella Sietas GmbH.

While economies across Europe have essentially bumbled, stumbled and fumbled in the wake of the global economic meltdown, Germany has remained comparitively strong. Despite the general migration of shipbuilding to the Far East, we decided to check in on the current status of this proud nation with a strong maritime heritage. German shipbuilders concentrated in 2012 on building cruise ships, megayachts, freight ferries and additional high-value, specialty ships. In total, nine German shipyards across 12 shipbuilding sites supplied 21 sea going ships with a total tonnage of 473,700.

The hull is complete, the steelwork concluded, the building of the deckhouse has begun – in the dock of Sietas shipyard the first jack-up vessel for offshore wind farms developed and constructed in Germany is currently taking shape. Construction started in April 2012; the handover of the ship to the client, the Dutch marine engineering company Van Oord, is planned for July of this year. For further work on the final assembly, the jack-up vessel needs to be floating in the dock harbor of the Sietas shipyard.

The German-based Shipyard J.J. Sietas, used Nupas-Cadmatic for its intricate offshore wind farm transport and installation vessel. The jack-up was developed for use near the coast in offshore wind parks. The vessel required a complex design in order to operate reliably, quickly and hold a stable position, even in heavy seas. JJ Sietas required software that could efficiently cope with these characteristics. With the use of Nupas-Cadmatic J.J. Sietas managed to reduce the design and engineering time to a minimum.

Cash-strapped  JJ Sietas Group is building a Van Oord liftboat but as a second order is uncomfirmed the yard's future is in doubt. In June 2012 the creditors’ committee voted in favour of an offer by the VeKa Group of the Netherlands to take over the Sietas shipyard. Despite six months of intensive negotiations, it has not proved possible to complete the deal. The reason being that the Sietas shipyard currently has only one order for a new construction, a jack-up vessel for offshore wind farms for the Dutch marine engineering company Van Oord. The prospect of a second new construction order of an identical type and the resulting continuing employment of the shipyard was stipulated by VeKa as a condition for the takeover.

Sietas shipyard hands over second suction dredger christened 'Eke Möbius' to Josef Möbius Bau-GmbH in Hamburg. The Eke Möbius is 118.47 metres long with a displacement of 6.8 metres and has four diesel engines that together develop 6,760 kW. It can dredge at a depth of up to 35 metres. This dredger has cargo capacity of 7,350 cubic metres and has a transit speed of 13 knots. While suction dredging it has a top speed of two knots. An innovative type of power management for the generators and electric engines…

Rüdiger Fuchs to become new Chief Executive Officer of P+S Werften, aims to re-define the German shipyard's business model. The experienced industry manager and qualified engineer (Daimler Group, Airbus and Sietas Group) will take over management of the company from Dr. Dieter Brammertz, who is leaving P+S as planned. The change is taking place after the European Commission has approved the rescue aid granted preliminarily by the German State of Mecklenburg-Pomerania. Rüdiger Fuchs (46): “I represent a new start at P+S Werften.

Five concrete offers have been received for the companies of the Hamburg-based Sietas Group. This is the result of the second phase of the extensive search for investors by the receiver of the Sietas shipyard, Berthold Brinkmann. During the first phase, a number of potential investors were approached by HSH Corporate Finance, which had been commissioned with the task, and interested parties were asked to submit indicative offers. During the second phase, these offers were to be put into more concrete terms and confirmed after an in-depth due diligence assessment. Receiver Berthold Brinkmann commented as follows: “The five binding offers that we have meanwhile received for the Sietas Group companies include both an overall solution as well as the acquisition of individual companies.

A start has been made on the construction by Sietas of the first sections and blocks of a offshore wind power jack-up vessel for the  Dutch marine engineering company Van Oord. Sietas is the first German shipyard to build one of these special-purpose vessels. Delivery is scheduled for the spring of 2013. In addition, Van Oord has an option on a second vessel of the same type. "The offshore market and wind farms are becoming more challenging. In future the foundations for these wind farms will be laid in water depths of up to 50 metres, instead of the current 30 metres. The turbines to drive the generators will in future require a power output of five to six megawatts, so they have become bigger and heavier.

In the shipbuilding hall of the Sietas shipyard in Hamburg, a start has now been made on the construction of a German premiere. Production has started on the first sections and blocks of the offshore wind power jack-up vessel for the prestigious Dutch marine engineering company Van Oord. In the presence of Peter de Ridder, COO of Van Oord, engineers from the specialist in complex offshore projects and the Sietas team, receiver Berthold Brinkmann and Rüdiger Fuchs, agent for the receiver, gave the go-ahead for the German premiere.

A number of prospective buyers have emerged for the companies of the Sietas Group. This is the result of the extensive investor search conducted by Berthold Brinkmann, receiver of the Sietas shipyard: "A number of people are interested in an overall solution, and there is special interest in Neuenfelder Maschinenfabrik (NMF) and Norderwerft. Today, the board of creditors of the Sietas shipyard asked me to enter into concrete negotiations with the prospective buyers." As reported, these prospective buyers have already submitted indicative offers, and they are to concretise and confirm these offers by mid-May. For this purpose, an in-depth due diligence audit is now starting, including the disclosure of all business documents of the Sietas shipyard, NMF and Norderwerft.

The management of J.J. Sietas KG Schiffswerft GmbH u. Co. and J.J. Sietas Verwaltungs GmbH have filed a petition for insolvency at the Municipal Court Hamburg on 17 November 2011, due to over-indebtedness. Work on ships under construction will continue, according to the company. The court has appointed a provisional creditors’ committee of inspection and, following a hearing of this provisional creditors’ committee of inspection, has appointed Lawyer Berthold Brinkmann of Hamburg…

SAL Schiffahrtskontor Altes Land has put the new building MV ‘Lone’ into service. Just three months after the German-based heavy-lift shipping company has sent the MV ‘Svenja’ - the world’s largest heavy-lift vessel - on its maiden voyage, the company’s fleet has now been expanded by a second vessel of the same Type 183. Just like its sister vessel, the heavy lifter was built at Sietas shipyard in Hamburg in six months. It has a lifting capacity of 2,000 tons and a speed of 20 knots. While the MV ‘Svenja’ features a Dynamic Positioning System 1 (DP1), the MV ‘Lone’ is equipped with a DP2.