Recent orders for Wärtsilä 50DF dual-fuel engines for two LNG carriers, eight engines in all, are no coincidence. This engine type promises benefits for LNG operators including larger cargo capacity, lower fuel consumption, higher flexibility in operation, and lower emissions. Gaz de France is the first to take the plunge. Until now, steam turbines have dominated as propulsion machinery
for LNG carriers, with their apparent reliability and the ease with which they can burn the boil-off gas from
the ship's cargo tanks while at sea.
The low fuel efficiency of steam turbines, however, has already encouraged almost all other shipping segments to switch to diesel-powered ships. As a result of both increased fuel efficiency and increased cargo capacity, an LNG carrier with dual-fuel electric machinery will
deliver more natural gas to the offloading terminal even when gas is used as fuel throughout the voyage.
The order last autumn for a 153,000 cu. m. LNG carrier by Gaz de France at Chantiers de l'Atlantique proves a point. The ship, due for delivery in 2005, will be propelled by dual-fuel engines and electric propulsion. The heart of the system is four dual-fuel engines - three 12-cylinder and one six-cylinder Wärtsilä 50DF - giving a combined output of 39.9 MW.
The ship will be the largest LNG carrier in service. It will be employed to carry LNG from Norway
, but is also designed for the alternative of trading on the spot market. This is the second of two similar orders to Wärtsilä. In 2002, four six-cylinder 50DF engines, with an aggregate output of 22.8 MW, were ordered for Gaz de France Energy
's 75,000 cu. m. LNG carrier, also being built at Chantiers de l'Atlantique in Sainte Nazaire.
Once delivered later this year, Gaz de France Energy will be the first LNG carrier in service featuring this new propulsion system. The membrane-type vessel will be employed to carry LNG from Algeria
to France. The service speed is 16 knots, which can be achieved with three of the four generating sets. Like its newer sister ship, the vessel is also designed for spot market trading, such as voyages to the USA.
"Wärtsilä has done extensive research to find a more attractive propulsion solution for LNG carriers," said Mikael Mäkinen, Group Vice President, Marine Division, when the second order was placed.
"We have studied the specific requirements of the LNG trade to determine the desired characteristics of the optimum propulsion plant, and we have now developed a number of attractive solutions."
Dual-fuel engines have so far been successfully applied in eight onshore power plants and a number of marine installations, including two FPSOs and two offshore support vessels. LNG carrier operators will be watching with interest when the first ship with Wärtsilä 50DF engines takes to the sea later this year.
The basic propulsion solution for these LNG carriers uses dual-fuel engines for electric power generation. The electric power is supplied to an electric propulsion system, fairly similar to the diesel-electric propulsion systems on modern cruise ships. The solution offers LNG carriers a number of significant advantages.
Calculations from the engine manufacturer show that the earnings of a 145,000 cu. m. dual-fuel electric LNG carrier sailing between the Middle East and Japan will be several millions of dollars per year higher than the annual earnings of a steam turbine powered ship of the same size.
The Wärtsilä 50DF, derived from the Wärtsilä 46 diesel engine, is a true dual-fuel engine, using low-pressure natural gas
as primary fuel. The engine can be run alternatively in gas mode or liquid fuel mode. It is also fully capable of switching over from gas to liquid fuel (marine diesel oil) automatically should the gas supply be interrupted, while continuing to deliver full power. When running on natural gas, ignition is triggered using a very small quantity of liquid fuel. Marine diesel oil can be used as a secondary fuel.
The Wärtsilä 50DF
Developed from Wärtsilä's very successful type 46 diesel engines, the Wärtsilä 50DF engines have cylinder dimensions of 500 mm bore by 580 mm piston stroke. Available in configurations with six, eight and nine cylinders in line, and 12, 16 and 18 cylinders Vee-form, the Wärtsilä 50DF engines develop 950 kW per cylinder MCR at 500 or 514 rev/min for 50Hz and 60Hz electricity generation respectively.
Gas fuel is supplied at a low pressure (less than five bar) to the engines. In gas mode, the Wärtsilä 50DF engines operate according to the lean-burn Otto process. Gas is admitted into the air inlet channels of the individual cylinders during the intake stroke to give a lean, premixed air-gas mixture in the engine combustion chambers. Reliable ignition is obtained by injecting a small quantity of diesel oil directly into the combustion chambers as pilot fuel which ignites by compression ignition as in a conventional diesel engine. The Wärtsilä 50DF engines use a 'micro-pilot' injection with less than one per cent of the fuel energy being required as liquid fuel at nominal load. Electronic control closely regulates the 'micro-pilot' injection system and air-gas ratio to keep each cylinder at its correct operating point between the knock and misfiring limits.
The preceding was excerpted in part from a paper by Glenn Mattas, Sales, Wärtsilä Finland Oy and Barend Thijssen, Solutions, Wärtsilä Corporation.