2006 Ship Production Symposium Call for Papers

Tuesday, March 28, 2006
Submissions for the Ship Production Symposium will be accepted in one of two categories:

1. Published paper with a presentation at the conference.

2. Presentation (PowerPoint) at the conference (no paper prepared for publication).

The goal for the SPS sessions is 2/3 published papers with presentations, and 1/3 presentations only. The SNAME Ship Production Committee, composed of the NSRP Ship Production Panel Chairs, will make the determination as to which submissions will be accepted. While any topics related to ship production will be considered, this year’s theme is Design/Build and What's In Between! Papers relevant to this theme might include, but are not limited to, the following:

- 3D Modeling - Ship Design Operations (i.e. sortie rates, shipboard firefighting, stores load-out)

- 3D Modeling - Life Cycle Issues (assembly/disassembly/removal/re-install)

- Design for Production Guidelines - producibility in shipbuilding

- Integrated Master Planning and the Role of Simulation

- Pre-production Planning based on Common Constraints - space, time, and labor

- Facility Capacity Issues and Potential Solutions

- Managing Contract Execution and Cost

- Effective Change Management - from Contract Award through Delivery

- Environmental, Safety, and Health Issues and their Impact on New Design

- Modern Design Standards in Naval Ship Classes - HME (Hull, Mechanical, Electrical)

- Technology Insertion - the Dilemma

- Cost, Cost, Cost - the Difficulty of Wringing It Out!

- Industry's Workforce of Tomorrow - Will they be prepared and where will they come from?

Important Dates

April 20, 2006 Abstracts due (Rough Draft Papers Preferred)

May 5, 2006 Selected authors are notified

June 23, 2006 Rough Draft due for review and comment

July 21, 2006 Final comments passed onto authors

August 8, 2006 Final electronic submissions due for publication

Rough Draft papers may be submitted on or before April 20th and are encouraged. For details on submitting papers and PowerPoint presentations, visity www.sname.org/author_instructions.htm. All abstracts, papers and presentations should be submitted to Dolly Pelto at pelto@aticorp.org.

Maritime Today


The Maritime Industry's original and most viewed E-News Service

Maritime Reporter June 2016 Digital Edition
FREE Maritime Reporter Subscription
Latest Maritime News    rss feeds

Technology

SPS Used for Pipe-Layer Upgrade

The 127,500dwt Solitaire has completed some of the most challenging projects in which heavy pipe has been laid in very deep waters.   Originally built in Japan as a mini-Capesize bulk carrier,

Another Fugro Vessels Joins Largest SEEP-Hunting Survey

Fugro has deployed multi-purpose offshore survey vessel Fugro Gauss to join the Fugro Brasilis offshore Mexico, to help complete the world’s largest seep-hunting

JIP Validates DNV GL's Helica Software

A joint industry project run by DNV GL has replicated stresses measured in an umbilical subjected to tension and bending in full-scale tests, further validating

 
 
Maritime Standards Naval Architecture Navigation Offshore Oil Port Authority Salvage Ship Electronics Ship Repair Ship Simulators Sonar
rss | archive | history | articles | privacy | contributors | top maritime news | about us | copyright | maritime magazines
maritime security news | shipbuilding news | maritime industry | shipping news | maritime reporting | workboats news | ship design | maritime business

Time taken: 0.0693 sec (14 req/sec)