J. Ray McDermott Sends Jacket to India from Louisiana

Friday, August 31, 2007
J. Ray McDermott (J. Ray) project staff at the Morgan City fabrication yard successfully completed the load-out of a 9,015-ton jacket built for Reliance Industries Limited as part of an Engineering, Procurement, Construction and Installation contract/purchase order undertaken at J. Ray company facilities worldwide.

The load-out, which took just over 23-hours from start to finish, was the culmination of just over 12 months of hard work fabricating the jacket for the KG-D6 field on the east coast of India. Before embarking on its 13,375-nautical mile journey around the world, the jacket’s first stop was Pascagoula, MS where it rendezvoused with a Fast Transport Vessel (FTV). The jacket and cargo barge were loaded onto the FTV for a 46-day journey to the J. Ray marine and fabrication base on Batam Island, Indonesia via the Suez Canal. After being offloaded from the FTV, the jacket and cargo barge will be towed for approximately 12 days to the East Coast of India.

The jacket was built at J. Ray’s Morgan City fabrication yard. The piles and topsides are currently being fabricated at the company’s Jebel Ali yard in the United Arab Emirates, with the piles scheduled for load-out in the near future and the topsides scheduled for sail away in early 2008. Design and engineering work were completed by J. Ray McDermott Engineering in Houston, and all installation work will be carried out by J. Ray’s in-house marine fleet. Once the jacket and topsides are installed, hook up will commence with expected completion during the first quarter of 2008, bringing the entire project to a close in approximately 22 months.

Maritime Today


The Maritime Industry's original and most viewed E-News Service

Maritime Reporter June 2016 Digital Edition
FREE Maritime Reporter Subscription
Latest Maritime News    rss feeds

Workboats

Solstad CSV Gets Propulsion Overhaul at Gibdock

Gibraltar’s Gibdock shipyard has completed its scope of work on Solstad Shipping’s Normand Cutter, a 127-meter-long, 10,979grt construction support vessel (CSV)

Rolls-Royce Azimuth Thrusters Ordered for New Tug

Rolls-Royce has won an order for US255 FP z-drives from San Francisco’s Vessel Chartering LLC, a wholly owned division of Baydelta Navigation. The thrusters will

US Workboat Market: Domestic Drivers

Sectors of the U.S. market are hot, but for how long? Five key variables drive the domestic brown water market.   The challenging operating climate currently facing blue water,

 
 
Maritime Careers / Shipboard Positions Naval Architecture Navigation Offshore Oil Pod Propulsion Ship Electronics Ship Repair Ship Simulators Shipbuilding / Vessel Construction Winch
rss | archive | history | articles | privacy | contributors | top maritime news | about us | copyright | maritime magazines
maritime security news | shipbuilding news | maritime industry | shipping news | maritime reporting | workboats news | ship design | maritime business

Time taken: 0.0662 sec (15 req/sec)