Alewijnse Completes Electrical Repairs on Stornes

MarineLink.com
Monday, October 07, 2013

Alewijnse Marine Systems performed electrical repairs and modifications on the flexible fallpipe vessel Stornes within a challenging timeframe. The vessel has left Damen Shiprepair Vlissingen after just three weeks of repairs, modifications and the commissioning of its electrical systems by a team of 40 Alewijnse technicians.

Damen Shiprepair Vlissingen subcontracted the electrical repairs and modifications to long-standing partner Alewijnse Marine Systems, which has a permanent representation at the shipyard. With just a three-week window in which to complete the project, Alewijnse assembled a forty-strong team of technicians to ensure that the work was completed on time and to specification.

Due to wear in the course of its offshore activities the Stornes required repairs and maintenance at Damen Shiprepair Vlissingen. The flexible fallpipe vessel is used for the protection and stabilization of offshore structures through the targeted application of rock material to subsea installations.

In its role in the modifications, Alewijnse was required to work on a number of systems. These included air humidification systems, air compressors, engine room ventilation, watertight doors, emergency systems and an exchanging port side shaft generator. The systems are located in the accommodation rooms, engine room and cargo areas.

The Stornes (26,000Te) is owned by Van Oord Dredging and Marine Contractors B.V. It is the largest flexible fallpipe vessel in the Van Oord fleet, with a length of 175 meters and a width of 26 meters. It has been operational since late September 2011, alongside the two other ultra-modern flexible fallpipe vessels in the Van Oord fleet; the Nordnes (24,000Te) and the Tertnes (9,785Te). The vessels are used to install rock in water depths up to 2,200 meters.

This is Stornes’ second visit to the Damen Shiprepair Vlissingen. Alewijnse Marine Rotterdam was a partner on previous maintenance projects for both the Nordnes and HAM 602, as well as the Stornes.

Alewijnse looks forward to winning further major repair orders in the near future, due to its unique service and maintenance partnership with Damen Shiprepair Vlissingen and its strong relationship with Van Oord Dredging and Marine Contractors B.V

alewijnse.com
 

Maritime Today


The Maritime Industry's original and most viewed E-News Service

Maritime Reporter July 2016 Digital Edition
FREE Maritime Reporter Subscription
Latest Maritime News    rss feeds

News

Cambodia Urged ASEAN to Avoid Words That Escalate Tension

Cambodia advised a grouping of South East Asian nations to avoid using words that "would escalate tension between China and the Philippines" in a weekend statement,

Technip Bags Woodside's Subsea Contract

Technip has been awarded a large(1) subsea contract by Woodside to support the development of the Greater Enfield Project offshore Western Australia, at a water

Keel Laying for Russia's Second Nuclear Icebreaker

Today the Baltic Shipyard in St Petersburg (part of United Shipbuilding Corporation) laid the keel of Ural, Project 22220’s second series-produced nuclear icebreaker.

Marine Equipment

CNCo Orders Remote Monitoring for 35 Vessels

Radio Holland, a global NavCom and service company in the maritime industry, said it has concluded  a maintenance and remote monitoring agreement with The China

Technip Bags Woodside's Subsea Contract

Technip has been awarded a large(1) subsea contract by Woodside to support the development of the Greater Enfield Project offshore Western Australia, at a water

Ecofix Filler Coat Cuts Rudder Repairs Cost

With an increasing trend for thruster and rudder manufacturers finishing their products with self-cleaning protective hard coatings, Antwerp headquartered Subsea

Electronics

Wärtsilä REvolution system takes sealing technology to New Level

The new Wärtsilä REvolution system is a digital management system that controls, monitors, records and analyses the performance of seals autonomously in real time,

B&G Software Upgrade for Zeus2 and Vulcan Chartplotter

B&G, the world’s leading sailing navigation and instrument specialist has upgraded its latest software for the full range of Zeus2 and Vulcan chartplotters. The

Vesper Marine to Protect LIS Underwater Cables

Vesper Marine announced that it has provided its virtual Automatic Identification System (AIS) to New York Power Authority (NYPA) to protect submerged power cables in Long Island Sound.

Vessels

CNCo Orders Remote Monitoring for 35 Vessels

Radio Holland, a global NavCom and service company in the maritime industry, said it has concluded  a maintenance and remote monitoring agreement with The China

Baltic Index Down as Rates for Large Vessels Stay Weak

The Baltic Exchange's main sea freight index, tracking rates for ships carrying dry bulk commodities, fell on Wednesday on weaker rates for larger vessels and supramaxes.

NASSCO Delivers Garden State to APT

Marking its seventh ship delivery in the span of just over a year, General Dynamics NASSCO has delivered the newly built ECO Class tanker Garden State for American Petroleum Tankers.

Interior Outfitting

First VectRA 3000 Tug Delivered

Sanmar’s first VSP (Voith Schneider Propeller) tug, of the new VectRA 3000 series, named Arie A has been constructed for Italian operator Tripmare Spa of Trieste.

 
 
Maritime Careers / Shipboard Positions Maritime Contracts Maritime Security Maritime Standards Naval Architecture Navigation Salvage Ship Repair Sonar Winch
rss | archive | history | articles | privacy | contributors | top maritime news | about us | copyright | maritime magazines
maritime security news | shipbuilding news | maritime industry | shipping news | maritime reporting | workboats news | ship design | maritime business

Time taken: 0.1677 sec (6 req/sec)