Tankship Scrapes By Bay Bridge, San Francisco

Press Release
Tuesday, January 08, 2013
Damage to 'Overseas Reymar': Photo credit USCG

The Coast Guard is investigating the incident where the tankshilp reported to the USCG it had allided with Tower Six of the bridge.

The 752-foot Marshall Island’s-registered tanker Overseas Reymar reported to the Coast Guard at approximately 11:20 a.m. that it had allided with tower six of the Bay Bridge in the San Francisco Bay. The vessel was immediately directed to an anchorage area just west of Alcatraz Island by the Coast Guard Captain of the Port. The vessel was in ballast at the time of the incident.

There were no reports of injuries and no reports of pollution. As a precautionary measure, the Coast Guard Captain of the Port of San Francisco ordered pollution-control boom to be staged.

The Coast Guard and other agencies immediately dispatched response assets to the scene, which included Coast Guard response boats, a cutter, and helicopter as well as additional resources from other federal, state, and local agencies. Coast Guard pollution response personnel, investigators and vessel inspectors were also deployed to check for any signs of pollution to begin an investigation into the incident and determine the ship’s structural integrity.

The double-hulled ship sustained damage to its starboard quarter.

Immediately following the report of the allision, the California Department of Transportation sent a structural maintenance team to investigate the bridge and found no structural or foundation damage. Caltrans is continuing to inspect the bridge and the bridge fender system damaged in the incident and will develop a plan for repairs. Vehicle traffic over the bridge was never impacted.

The Overseas Reymar is owned by OSG Ship Management, U.K. and was headed outbound to sea at the time of the incident.

 

Maritime Reporter October 2013 Digital Edition
FREE Maritime Reporter Subscription
Latest Maritime News    rss feeds

Legal

Port Firm Fined £650,000 for Health, Safety Breach

A port operator has today (Monday 29 September) pleaded guilty to health and safety breaches, following the deaths of three crew members of a tug which capsized on the River Clyde in 2007.

IMO Takes Step Towards Electronic Certificates

In the future, the IMO member States should accept the use of electronic certificates. This is the request of the Facilitation Committee (FAL) and, hence, the road is paved for less paperwork,

K-Line to Plead Guilty to Price Fixing

Kawasaki Kisen Kaisha Ltd. (K-Line), a Japanese corporation, has agreed to plead guilty and to pay a $67.7 million criminal fine for its involvement in a conspiracy to fix prices,

Casualties

Maritime Reporter @ 75: The Daily Cartoon

Maritime Reporter & Engineering News was founded by John J. O'Malley (1905-1980) in 1939, and today ranks as the world's largest audited trade publication in the world serving the maritime industry,

Leak May Sideline New Mexico Nuclear Waste Site

It may be five years before a nuclear waste dump in New Mexico closed by a radiation leak is fully operational again, and the facility will need at least $240

New Simulation Tool for Collision Reconstruction

BMT ARGOSS and BMT Surveys, subsidiaries of BMT Group Ltd, the international design, engineering and risk management consultancy, announced an innovative new service

Coast Guard

USCG Cutter Rush Returns

The crew of Coast Guard Cutter Rush returned to its homeport following a successful 72-day deployment in the Central and Western Pacific, Monday. Rush departed

Coast Guard Investigating Fatal Boating Collision

The Coast Guard is investigating a fatal collision between a towboat and a pleasure craft near Cincinnati, Thursday evening. Watchstanders at Coast Guard Sector

Coast Guard: Investigations Underway in Cutter Collision

The Coast Guard is conducting a series of formal investigations after Tuesday’s collision involving a Coast Guard cutter and a fishing vessel off the coast of Puerto Rico.

 
 
Maritime Security Naval Architecture Navigation Offshore Oil Pod Propulsion Salvage Ship Electronics Ship Repair Shipbuilding / Vessel Construction Winch
rss | archive | history | articles | privacy | terms and conditions | contributors | top maritime news | about us | copyright | maritime magazines
maritime security news | shipbuilding news | maritime industry | shipping news | maritime reporting | workboats news | ship design | maritime business

Time taken: 0.3398 sec (3 req/sec)