Magnalight Adds to Lineup

press release
Monday, January 23, 2012
Class 1 Division 2 LED Light

Magnalight.com Announces Release of Class 1 Division 2 LED Light to Their Hazardous Location Lighting Lineup.


Magnalight.com by Larson Electronics has announced the release of a high power, hazardous location approved, LED light fixture capable of replacing 400 watt metal halide units. Designed for use in demanding industrial, commercial, and marine environments, the HAL-PRM-150W-LED incorporates the latest in Cree led design and offers the high efficiency, high power and long life of LEDs in an IP65 rated  fixture. Designed to provide an efficient and highly durable alternative to 400 watt metal halide lamps, this hazardous location light is Class 1 Division 2 approved and rated for use in outdoor and marine environments.


Producing 14,790 lumens in a 60 degree flood pattern, the HAL-PRM-150W-LED hazardous location LED light fixture is designed to replace 400 watt metal halide lamps. Featuring a rugged aluminum housing fitted with 30 Cree XPG™ LEDs, this U.L. approved fixture combines the latest in LED development with proven hazardous location fixture design to produce a rugged unit that rivals 400 watt metal halides for output and light quality. IP65 rated and approved for use in wet and marine environments, this hazardous location LED light is constructed of cast aluminum with a hinged tempered glass door and corrosion resistant hardware for durability and resistance to demanding conditions. This fixture is fitted with a u-shaped trunnion mount which provides vertical adjustability and allows operators to easily mount this unit to walls and flat surfaces. Built in pulse width modulation circuitry provides active heat control to produce maximum LED life and maintains even LED output over the life of the LED assembly. These led lights are designed to operate with 120v AC and include a threaded ¾ inch conduit entrance for easy and secure connection to power sources. Approvals for these lights include Class 1 Division 2, groups A, B, C and D, as well as UL1598 approval for outdoor marine use. These hazardous location LED lights are ideal for operators in commercial and industrial settings who wish to upgrade from hot running, fragile, and less efficient metal halide lights, yet need a rugged fixture that can withstand demanding conditions. These units provide 50,000 rated hours of life, use less than 2 amps on 120 volt current, and are well suited to outdoor and marine locations where hazardous gases, vapors and flammable atmospheres may occasionally be present.
 

“The HAL-PRM-150W-LED is a high powered LED flood light for hazardous location areas,” said Rob Bresnahan with Larson Electronics’ Magnalight.com.  “Operators are looking for Class 1 Division 2 LED lights that truly create a flood light output rivaling that of conventional 400 watt metal halide flood lights.  The HAL-PRM-150W-LED hazardous location flood light is designed to do just that.”
 

Larson Electronics’ Magnalight produces a wide range of intrinsically safe LED lights, explosion proof LED work lights, portable LED light towers, explosion proof flashlights and LED trouble lights. The entire line of Magnalight explosion proof lighting can be viewed by visiting www.Magnalight.com. You can also call 1-800-369-6671 to learn more about all the Magnalight lighting products and their custom ordering options. For international inquires call 1-214-616-6180 for more details.

 

Maritime Reporter August 2014 Digital Edition
FREE Maritime Reporter Subscription
Latest Maritime News    rss feeds

People & Company News

AEGIR-Marine Partners with On Site Alignment

AEGIR-Marine and On Site Alignment (OSA) signed a contract at SMM in Hamburg confirming the companies’ strategic alliance concerning stern seal and propulsion service

BSH Certifies SeaCURE for Wide Range of Flow Rates

The Federal Maritime and Hydrographic Agency of Germany (Bundesamt für Seeschifffahrt und Hydrographie- BSH), which previously granted the Evoqua SeaCURE Ballast

SSI Webinar: ShipConstructor MarineDrafting

As part of its Technical Webinar Series, SSI will host a ShipConstructor MarineDrafting Product webinar on Wednesday, September 24, 2014 from 8-9 a.m. (PDT).  The

New Products

SSI Webinar: ShipConstructor MarineDrafting

As part of its Technical Webinar Series, SSI will host a ShipConstructor MarineDrafting Product webinar on Wednesday, September 24, 2014 from 8-9 a.m. (PDT).  The

GVF Launches Maritime Communications Glossary

Lexicon of Communications Terminology to be applied to Communications Solution Provider & Solutions User Dialogues During the Informa VSAT 2014 conference in London,

New e-Navigation Technologies from Transas

Transas Marine introduced new software solutions for voyage planning and fleet management at SMM 2014 as a step towards becoming the forerunner in the development of e-Navigation technologies.

Marine Equipment

AEGIR-Marine Partners with On Site Alignment

AEGIR-Marine and On Site Alignment (OSA) signed a contract at SMM in Hamburg confirming the companies’ strategic alliance concerning stern seal and propulsion service

BSH Certifies SeaCURE for Wide Range of Flow Rates

The Federal Maritime and Hydrographic Agency of Germany (Bundesamt für Seeschifffahrt und Hydrographie- BSH), which previously granted the Evoqua SeaCURE Ballast

Brommeland to Supply KNS VSATs to Kopervik

Brommeland Elektronikk AS, the Norwegian distributor for KNS, was awarded a contract to supply 13 VSAT systems to a large part of the Norwegian shipowner Kopervik Group fleet.

Maritime Safety

MNZ Inspectors Board Fishing Vessels Off South Island

A joint operation by Maritime New Zealand (MNZ) and the New Zealand Defence Force – Operation Moana – has seen 16 fishing vessels operating off the west coast of

USCG in Search of Missing Man in Lake Michigan

The Coast Guard is searching for a man who went missing on Lake Michigan, Tuesday. Missing is 48-year-old Joseph Kiehm from Milwaukee. Kiehm was last seen aboard his 26-foot white sailboat,

Ebola & the Shipping Industry: Latest McQuilling Analysis

Although the Ebola epidemic has remained predominantly in West Africa, fears about the virus have spread globally and it is becoming a cause for concern in the transportation industry.

 
 
Maritime Careers / Shipboard Positions Maritime Contracts Maritime Standards Offshore Oil Pipelines Pod Propulsion Salvage Ship Electronics Ship Simulators Shipbuilding / Vessel Construction
rss | archive | history | articles | privacy | terms and conditions | contributors | top maritime news | about us | copyright | maritime magazines
maritime security news | shipbuilding news | maritime industry | shipping news | maritime reporting | workboats news | ship design | maritime business

Time taken: 0.2579 sec (4 req/sec)