Marine Link
Tuesday, May 7, 2024
SUBSCRIBE

Assembly News

03 May 2024

Bad Weather Forces US Military to Pause Gaza Pier Construction

(Photo: U.S. Central Command)

The U.S. military said on Friday it was temporarily pausing the offshore construction of a maritime pier because of weather conditions and instead would continue building it at the Israeli port of Ashdod.The maritime pier, once built, will be placed off the coast of Gaza in a bid to speed the flow of humanitarian aid into the enclave."Forecasted high winds and high sea swells caused unsafe conditions for soldiers working on the surface of the partially constructed pier," the U.S.

30 Apr 2024

Carbon Clean Starts CCS Module Construction for FlagshipONE

Source: Carbon Clean

Carbon Clean has achieved a fabrication milestone on Ørsted’s FlagshipONE project, Europe’s largest commercial-scale e-methanol facility under construction. The first equipment has been mounted on the structural steel of the first module, marking the start of the module assembly process.Once operational, Carbon Clean’s technology will be capable of capturing 70,000 tonnes of biogenic CO2 per year for Ørsted’s facility in Örnsköldsvik, Sweden.Carbon Clean’s CaptureX semi-modular technology for this project is being fabricated at Schwartz Hautmont’s site at the Port of Tarragona in Vila-seca…

30 Apr 2024

Acteon’s LDD Getsy Busy at Scottish Port's Infrastructure Upgrade

(Credit: LDD)

LDD, an Acteon company, has been awarded a contract by George Leslie to perform piling works on the Kennacraig Port's ferry terminal in Scotland.LDD, a marine foundations brand within Acteon, is supplying reverse circulation drilling (RCD) services to George Leslie to construct a new sheet pile quay wall at Kennacraig Port.The project is being undertaken in challenging ground conditions with hardness ranging from 90 to 150 MPa.Kennacraig is an existing operational ferry terminal, and the piling works will upgrade the port infrastructure to facilitate the use of new vessels.

25 Apr 2024

New Cranes & Offshore Wind Efficiency

NOV is upgrading the cranes on Cadeler’s existing O-class WTIVs. Image courtesy of Cadeler.

The end may be in sight, but the race for bigger cranes is still having an impact on offshore wind project efficiency.The industry has already felt the need for upgrading crane lifting capacity on existing offshore wind installation vessels: NOV is upgrading the cranes on Cadeler’s existing O-class wind turbine installation vessels (WTIVs), and a gantry crane extension will soon make Van Oord’s Svanen one of the largest floating heavy-lift installation vessels.It’s a newbuild phenomenon too. NOV has developed a telescoping leg encircling crane for Shimizu’s GustoMSC-designed WTIV Blue Wind.

22 Apr 2024

Rear Admiral Peter Brady Retires from Maritime Authority of Jamaica

Source: MAJ

Maritime Authority of Jamaica’s Director General, Rear Admiral (ret’d) Peter Brady, has retired, with the position being accepted by Bertrand Smith, formerly the MAJ’s Director of Legal Affairs.Brady has served in this role since the Maritime Authority’s inception in 1999.As Director General, he was primarily responsible for elevating Jamaica’s maritime status regionally and globally. He spearheaded several major initiatives by the MAJ including the development of Jamaica as a shipping hub with attendant services such as bunkering and drydocking…

21 Apr 2024

IMO Legal Committee to Discuss Seafarer Abandonment

Source: IMO

The Legal Committee of the IMO will meet for its 111th session at IMO Headquarters in London from April 22 to 26, 2024. The Committee deals with any legal matters within the scope of the IMO, including issues relating to liability and compensation, fair treatment of seafarers and the registration of ships. This meeting will discuss:1. Abandonment of seafarersSeafarer abandonment happens when shipowners fail to fulfil obligations to seafarers related to timely repatriation, payment of outstanding wages or salary…

15 Apr 2024

Optimizing Blast and Paint Processes in New Construction Shipbuilding

(Photo: BlastOne International)

The efficacy of surface preparation and coating application in the new construction shipbuilding industry is fundamentally anchored in a well-coordinated, integrated approach. This intricate process, essential for achieving top-tier corrosion control, is methodically segmented into five crucial stages:Raw material entryPainting the modulesSmall partsPainting of erection joints at the module levelFinal paint and ship's completion. Each stage is crucial in its own right but achieves…

11 Apr 2024

Austal USA Begins Building US Navy's LCU 1710 Landing Craft

(Image: Austal USA)

Austal USA earlier this month celebrated the start of construction on the first of three LCU 1710 Landing Craft Utility vessels for the U.S. Navy at the company’s Mobile, Ala. shipyard.Austal USA, a subsidiary if the Australian shipbuilding group Austal, was awarded a US$91.5 million (A$143.4 million) contract in September 2023 that includes three LCU 1710 vessels and associated support efforts.Austal CEO Paddy Gregg said the start of construction on Austal USA’s latest steel…

11 Apr 2024

Insights: Jennifer Carpenter, President & CEO, American Waterways Operators

Jennifer Carpenter, President & CEO, American Waterways Operators (Photo: AWO)

Jennifer Carpenter joined The American Waterways Operators (AWO), the national trade association representing the inland and coastal tugboat, towboat and barge industry, in August 1990 and became its president and CEO in January 2020. She highlights some of the greatest focus areas for the 80-year-old trade group—simultaneously looking at both the present day and the road ahead.The towboat, tug and barge industry is in a period of rapid evolution. How is AWO—now in its 80th year…

29 Mar 2024

Welsh Port Steps Closer to Becoming Floating Wind Hub

Rendering - Port of Talbot as offshore wind hub (Credit: ABP)

A project to transform the Port Talbot into a major hub for floating offshore wind (FLOW) and green energy development has come one step closer to securing a share of up to $200 million (£160 million) of UK Government funding.The UK Government has agreed to take forward the Future Port Talbot project and the Port of Cromarty Firth to undergo due diligence as part of the next stage of its Floating Offshore Wind Manufacturing Investment Scheme (FLOWMIS).The due diligence process…

20 Mar 2024

Meyer Werft Lays Keel for Next Disney Cruise Line Ship

(Photo: Meyer Werft)

The construction of the next cruise ship for Disney Cruise Line has reached another milestone: assembly of the ship's hull began today with the traditional keel-laying ceremony. The ship is the sister ship of the Disney Treasure, which is also under construction, and the Disney Wish, which launched in 2022.The keel was laid in the 504-meter-long covered building dock at Meyer Werft in Germany. Philip Gennotte, portfolio project management executive, Walt Disney Imagineering Germany…

19 Mar 2024

RWE Joins Forces with Spanish Port to Create Floating Wind Hub

© Tjeerd / Adobe Stock

Germany's top utility RWE has signed a Letter of Support with the Port Authority of A Coruña to facilitate the scaling-up of the port capacity in support of the Spanish government’s floating wind targets.Working together under a Letter of Support, the partners will investigate the potential for transforming infrastructure at the Port of Coruña, in northwest Spain, into a logistic hub for the marshalling, assembly and deployment of major components for commercial-scale floating…

13 Mar 2024

New UTM Payload Available for Scout 137 Drone System

Source: ScoutDI

ScoutDI has added an ultrasonic thickness measurements (UTM) payload, complete with in-flight A-scan, to the capabilities of its end-to-end inspection data solution for the Scout 137 drone.The product is suitable for offshore applications where drones are becoming common for visual inspection and steel plate thickness sampling must be done regularly to monitor e.g. the effects of corrosion over time.Adding the UTM payload enables the Scout 137 drone to collect location-tagged…

21 Feb 2024

Maine Selects Sears Island as Preferred Site for Floating Wind Port Facility

© creativenature.nl / Adobe Stock

The government of Maine has selected a section of state-owned area on Sears Island as its preferred site for a port facility development that will support the floating offshore wind industry.The selection of the site, announced by the Governor of Maine Janet Mills, follows an extensive public stakeholder process led by the Maine Department of Transportation and Maine Port Authority to consider the state’s primary port development options, including multiple potential sites in the Port of Searsport…

13 Feb 2024

Sunken Ship Spilling Oil in Trinidad and Tobago

(Photo: Office of the Chief Secretary)

First responders and volunteers from Trinidad and Tobago on Tuesday sought to contain an oil spill detected last week in the Caribbean country's waters and clean areas of Tobago island's coast already affected by the incident.Trinidad and Tobago's coast guard first spotted the spill on Feb. 7, about 6 kilometers off the coast of Studley Park, the chief secretary of Tobago's national assembly, Farley Augustine, said in a press conference on Sunday.Barriers have been installed to contain the spill…

06 Feb 2024

Austal USA Plans New Facility and Shiplift in Mobile

(Image: Austal USA)

Shipbuilder Austal USA announced it is planning to boost capacity at its Mobile, Ala. shipyard with the addition of a new manufacturing facility.The infrastructure expansion, which will be to the south of Austal USA’s current waterfront facility, will include a new assembly building, waterfront improvements, and a new Pearlson-designed shiplift system. Start of construction on the project is planned for summer 2024.The construction of this new building and waterfront support area continues the expansion Austal USA began in March 2021 with the groundbreaking of the steel panel line.

06 Feb 2024

Huisman Secures Port Order for Automated Stacking Cranes

(Credit: Huisman)

Dutch manufacturer Huisman has entered the port and logistics market with the order for series of automated stacking cranes (ACSs) from Hutchison Ports ECT Rotterdam (ECT).The ACSs will serve for the efficient handling and buffering of containers. The cranes feature a fully automated process for handling and buffering containers, providing a solution for enhanced operational efficiency, required for 24/7 operational time.The diversification in port automation underscores Huisman's…

02 Feb 2024

IMO Secretary-General Sets Fresh Agenda for Maritime

Source: IMO

IMO Secretary-General Arsenio Dominguez has shared the Organization’s plans and focus areas for the next four years.Speaking at a press conference at IMO Headquarters in London, Dominguez outlined four strategic priorities:• IMO’s work to regulate international shipping;• its support to Member States – particularly Small Island Developing States and Least Developed Countries;• enhancing public awareness and image; and• relations with people and stakeholders. He said: “As a global industry that is responsible for transporting over 80% of trade around the world, shipping is indispensable.

10 Jan 2024

Polish Shipping Association Joins ECSA

Source: Polish Shipowners' Association

The European Community Shipowners’ Associations (ECSA) has welcomed the Polish Shipping Association as a full member as of January 1, 2024.The Polish Shipping Association brings together the Polish Shipowners’ Association (ZAP) and the Polish Shipping Companies Association (PZPŻ).“We are proud to welcome the Polish Shipping Association as a new member of ECSA. The Polish Shipping Association extends the geographical scope covered by our membership, brings additional expertise and knowledge…

22 Jan 2024

Red Sea Shipping Attacks Pressure China's Exporters

© ABCDstock / Adobe Stock

For Chinese businessman Han Changming, disruptions to Red Sea freight are threatening the survival of his trading company in the eastern province of Fujian.Han, who exports Chinese-made cars to Africa and imports off-road vehicles from Europe, told Reuters the cost of shipping a container to Europe had surged to roughly $7,000 from $3,000 in December, when Yemen's Iran-aligned Houthi movement escalated attacks on shipping."The disruptions have wiped out our already thin profits…

25 Jan 2024

Californian Port Gets $427M Boost for New Offshore Wind Infrastructure

© creativenature.nl / Adobe Stock

The U.S. government has awarded a major grant to the Humboldt Bay Harbor, Recreation, and Conservation District for the construction of a new marine terminal to be primarily used for floating offshore wind-related activities.The grant for the Humboldt Bay Offshore Wind MVP (Minimum Viable Port) project comes through the U.S. Department of Transportation’s Nationally Significant Multimodal Freight & Highway Projects (INFRA) grant program, which received a substantial funding increase…

09 Jan 2024

Indian Register of Shipping Announces New Managing Director

Source: IRS

With the rapid expansion of the Indian Register of Shipping (IRS), P.K. Mishra, previously Head of Operations, has been promoted to Joint Managing Director, effective January 1, 2024.Joining as a Surveyor with IRS in 1998, Mishra rose through the ranks to become Chief Surveyor in 2023. With close to 25 years of experience in IRS and the industry handling key responsibilities, he has been an integral part of the organisation. Throughout his time in IRS, Mishra has consistently demonstrated leadership…

24 Jan 2024

Rolls-Royce Opens mtu Remanufacturing and Overhaul Center in US

Rolls-Royce Power Systems CEO Joerg Stratmann addressed employees during the opening ceremony for the new Remanufacturing & Overhaul Center at the company’s mtu Aiken campus in South Carolina. Initial production will focus on remanufactured service parts to support customers in North America. (Photo: Rolls-Royce)

Rolls-Royce Power Systems Division has opened a new Remanufacturing and Overhaul Center on its mtu Aiken campus in South Carolina.First announced in 2021 and representing a low double-digit million dollar investment, the new 69,000-sq.ft. (6,400 sqm) facility is connected to the existing manufacturing operations, bringing formerly outsourced workshop and warehouse operations in-house and expands them to provide remanufacturing and overhaul of mtu Series 2000, Series 4000 and Detroit Diesel 2-Cycle engines and components, plus internal and external rework services.