ABB, SINTEF Test Fuel Cells of Hydrogen Hybrid Ferry
Swiss-Swedish multinational corporation ABB and European independent research organisations SINTEF Ocean laboratory in Trondheim test fuel cells for the world’s first conversion of a hydrogen hybrid ferry.The tests aim to provide answers needed for Norwegian shipyard Fiskerstrand to convert an existing ferry to run on a combination of batteries and hydrogen fuel cells.The tests will also provide answers into the introduction of hydrogen fuel cells for future reviews of the rules covering shipboard use of hydrogen.In addition, the tests will simulate the conditions the ferry is expected to face on a high frequency 10km route to make sure that the propulsion systems including fuel cells are robust enough for repetitive…
AEGIR-Marine: New Propulsion Workshop DNV-GL approved
AEGIR-Marine reports that it received an Approved Workshop statement from DNV-GL. AEGIR-Marine is the first brand-independent service provider in The Netherlands with an approved workshop for repair and maintenance of propulsion systems. For brand-independent service providers who perform repair and maintenance work on maritime propulsion systems, approval of their workshop is completely new. AEGIR-Marine approached DNV-GL for the approval process, because this agency also supported the company in obtaining the ISO 9001 certification, the international standard for quality management systems.
MTU Diesel Gensets Ordered for UK Combat Ships
Rolls-Royce is to supply 12 MTU diesel gensets to prime contractor BAE Systems for the first three Type 26 Global Combat Ships due to go into service with the U.K Royal Navy. The deal means that the core components of the frigate’s combined propulsion system will come from Rolls-Royce: four MTU diesel gensets with 20V 4000 M53B engines, each delivering 3,015 kW of mechanical power, and one Rolls-Royce MT30 gas turbine. The MTU brand is part of Rolls-Royce Power Systems. The Type 26 Global Combat Ship is the first newly-designed Royal Navy surface vessel to be equipped with MTU engines.
Peter De Vos Appointed Marine Propulsion Course Trainer
The ninth edition of the international HME Marine Propulsion training series starts in September. It will be a new experience for Peter de Vos, Assistant Professor of Marine Engineering at Delft Technical University (TU Delft). As the latest addition to the team, De Vos will work closely with Professor Douwe Stapersma in modules 1, 3 and 5. Peter De Vos graduated cum laude in 2008 on the modeling of a fuel processing plant for the application of fuel cells onboard vessels in the Ship Design, Production and Operation section of the Marine Engineering department at TU Delft.
FellowSHIP Listed as a Top Sustainable Solution
FellowSHIP, a hybrid energy system for merchant ships which couples a fuel cell with advanced batteries, saving fuel and reducing emissions, is added to Sustainia100 - a guide to 100 society-transforming, sustainable and readily available solutions. The project, an R&D collaboration between DNV, Wartsila, and Eidesvik, is demonstrating the use of a fuel cell integrated with a battery pack aboard the vessel Viking Lady. "On behalf of DNV and our partners Wärtsila and Eidesvik…
Marine Propulsion Course with Professor Woud
The first module in the Marine Propulsion Course will start on 22 and 23 September. This seventh edition of the training series will be the last one in which Professor Hans Klein Woud, who played a leading role in the establishment of the successful course, will act as instructor for modules 1 and 5. “The Marine Propulsion Course still meets a significant demand,” says Klein Woud. “The purpose of the series is to provide higher educated technical employees with further insight…