Four Escort Tugs Delivered to Star Marine
Four new escort tugs designed by Robert Allan Ltd. and constructed at the Triyards SSY facility in Saigon, Vietnam, by contract to Greenbay Marine Services Pte. of Singapore, have been delivered to owner Star Marine Ltd. of Jeddah, Saudi Arabia.The four RAstar 3400 escort tugs, named Murjan 1, 2, 3, and 4, will be stationed in the Red Sea port of Rabigh, Saudi Arabia, and managed by Marine Services Co. Ltd.According to the designer, the RAstar 3400 escort/offshore terminal tug designation is reserved for a distinctive class of high-performance ASD tugs…
New Rolling Mill Inaugurated at Fundia Nedstaal
The new rolling line at Fundia Nedstaal B.V.’s rolling mill was inaugurated in the Netherlands on Wednesday. The wire rod production of the company has now been centralised in a single combi mill instead of the previous two rolling lines. than before. President and CEO Mikko Kivimäki. at the rolling mill, and decreases maintenance costs. water. a year. line is 70 metres per second, i.e. 250 km/h. main installations were carried out in May and June. in the line. The total cost of the investment is EUR 11 million. end products for the automotive and engineering industry. such as adjustable wrenches or pliers. Together with Fundia Wire in Finland, Fundia Nedstaal B.V. ball bearing wire rods in Europe. European producer of valve spring wires. people. products.
Robert Allan Ltd. Named CIMarE Charter Member
Robert Allan Ltd. announced its election as the Charter Corporate Member of the Canadian Institute of Marine Engineering (CIMarE) Roll number 0001. CIMarE national council created the corporate membership class in an effort to further engage corporations, organizations, societies and professional associations in support of the activities of the organization. CIMarE was incorporated by federal charter in 1976 to promote the maritime industry and its associated professions. Over the years…
Dmitry Kapiturov of Robert Allan acquires APEGBC Registration
Robert Allan Ltd. is pleased to announce that Mr. Dmitry Kapiturov has earned his accreditation as a Registered Professional Engineer with APEGBC (Association of Professional Engineers and Geoscientists of British Columbia). He has been an integral part of the Robert Allan Ltd. team for the past 5 years where he has primarily been involved in management of the production design team and design of vessel structures. Prior to joining Robert Allan Ltd., Dmitry worked 3 years as a…
OTC Announces New Board Members
The Offshore Technology Conference (OTC) board of directors elected the 2004-2005 chairman and vice-chairman during this year’s event that took place 5-8 May at Reliant Center at Reliant Park in Houston. Members of the OTC Board are appointed to four-year terms by their respective society or organization. The OTC Board includes 13 representatives, 11 from OTC’s sponsoring organizations and two from OTC’s endorsing organizations. The two principal officers, the Chairman and the Vice Chairman, are elected for two-year terms by the Board during their annual meeting. The 2004-2005 OTC Chairman is Rod Allan, Manager of Core Expertise for Transocean Offshore Deepwater Drilling, Inc. Allan has served four years on the OTC board and succeeds Charlie Richards of C.A.
Offshore: OTC Announces Technology Winners
The Offshore Technology Conference (OTC) announces 15 winners for its inaugural Spotlight on New Technology Program. These winners are recognized before, during and after the 35th annual OTC, 3-6 May, Reliant Center at Reliant Park in Houston. New Technology program, " said Rod Allan, OTC .04 Chairman. Applications for the Spotlight on New Technology were distributed at OTC .03 and were due 9 January 2004. Submissions had to meet four criteria: new and innovative, proven, broad interest, and significant impact. Winners will be recognized on site at this year's conference, scheduled May 3-6, on the exhibition floor and in the registration area. Spotlight on New Technology will continue as an annual recognition program coinciding with OTC.
Cheoy Lee Joins Robert Allan “Century Club”
On April 26, 2016, Cheoy Lee Shipyards launched the 100th vessel it has built to a Robert Allan Ltd. design, becoming the second shipyard worldwide to do so, after Sanmar’s initial achievement of this milestone in 2013. This epic tug, Hull Number 5098 at Cheoy Lee, is a RAstar 3200 class ASD tug, with completion expected in August, 2016. At present Cheoy Lee’s Hin Lee yard in China is very busy with a flotilla of Robert Allan Ltd. tugs at various stages of completion. The cooperation between Robert Allan Ltd.
Cheoy Lee Joins the Robert Allan Ltd. ‘Century Club’
On April 26, 2016, China’s Cheoy Lee Shipyards launched its 100th vessel built to a Robert Allan Ltd. design, becoming the second shipyard worldwide to do so, following Sanmar’s achievement in 2013. The cooperation between Robert Allan Ltd. and Cheoy Lee dates back to 2003, with the construction of the first of the Z-Tech series tugs for PSA Marine. The milestone tug, Hull Number 5098 at Cheoy Lee, is a RAstar 3200 class ASD tug, with completion expected in August, 2016. Cheoy Lee’s Hin Lee yard in China is presently busy with a flotilla of Robert Allan Ltd.
MN 100: Robert Allan Ltd.
Executive Chairman of the Board: Robert G. Robert Allan Ltd. is Canada’s oldest private consulting Naval Architectural firm. Established in Vancouver in 1930, the company first produced designs for the British Columbia fishing fleet and coastal ferry services, among others. The company was restructured in 2008 to become employee owned with the firm’s senior leadership becoming shareholders in the business. In addition to ship design, Robert Allan Ltd. offers a range of marine engineering analysis services…
Uotinen Joins Robert Allan Ltd.
Sami Uotinen will join naval architecture firm Robert Allan Ltd. on October 1, responsible for European Business Development initiatives, operating from Turku, Finland. Uotinen, a graduate naval architect, joins Robert Allan Ltd. from Rolls Royce, where he has worked since 2000, most recently as North American Sales Manager for Z-Drive propulsion. He has also held positions at Aquamaster, Kamewa and Kvaerner Masa Yards.
Loutit Awarded Robert Allan Memorial Scholarship
The trustees of the Robert Allan Memorial Scholarship Trust have awarded the scholarship for 2017 to Taryn Loutit. Loutit is a fourth year mechanical engineering student at the University of Victoria with a passion for and an objective to pursue a career in naval architecture and marine engineering. She has an outstanding academic record and has completed five co-op work terms with marine-related businesses. The Robert Allan Memorial Scholarship Trust was initiated in 1982 from a bequest by the late Robert F. Allan, and with support from his many industry friends and colleagues.
Robert Allan Ltd. Restructures
Robert Allan Ltd. announced that a long-planned re-structuring of the company has just been completed. Effective July 2008, Robert G. Allan has been appointed as Executive Chairman of the Board and remains at the helm. A core group of senior employees have become shareholders of Robert Allan Ltd., and will become increasingly involved in the company business. Robert Allan Ltd. The new organization will establish the culture of employee ownership and facilitate the succession from generation to generation. Assuming the position of President will be Ken Harford, P. Eng., who has been a key figure in the company for the past twenty years, most recently as Vice-President of Marine Engineering.
Sanmar Building 150th Robert Allan Designed Tug
Robert Allan Ltd. and Sanmar Denizcilik A.S. have reached a milestone in their ongoing relationship: scheduled to be launched later this year, a RAstar 2800 will mark the 150th tug that Sanmar has built to a Robert Allan Ltd. design. This milestone tug is the first of six custom designed for Svitzer’s new “Silver Bullet” project. The cooperation between the two companies began in 1995, with a series of small 18m tugs designed and built for Sanmar’s own fleet. Sanmar’s rate of deliveries has since escalated dramatically…
Robert Allan Receives Meritorious Achievement Award
Rob Allan was presented with the Meritorious Achievement Award as one of the President’s Awards conferred by Engineers & Geoscientists British Columbia (EGBC) on October 20, 2017 at their Annual Award Gala held in Whistler, BC. This award is given annually to a member of the Association who has achieved distinction and outstanding goals associated with his/her profession. Allan has over 45 years of experience in the design of commercial workboats of all types, but especially high-performance tugboats for tanker escort and offshore terminal operations.
MN100: Robert Allan Ltd.
With about 82 employees, Robert Allan Ltd. is Canada’s most senior consulting Naval Architectural firm, established in Vancouver, B.C. in 1930. The company has earned an international reputation for innovative, successful designs for a wide range of ships and has been a leader in creating cost-efficient vessels for service in the marine transportation industry. Ship Design Robert Allan Ltd. has an experienced, professional staff of Naval Architects and Engineers capable of handling any type of ship design, but the company is best known for tackling the innovative and unusual design problem.
Allan Awarded IMO International Maritime Prize
The International Maritime Prize for 2005 has been presented to Dr. Tom Allan (United Kingdom), former Chairman of the IMO Maritime Safety Committee (MSC) and Permanent Representative of the United Kingdom to IMO. Efthimios E. Mitropoulos, Secretary-General of the International Maritime Organization, presented the prize to Dr. Allan during a special ceremony (on Monday, 6 November) during the 97th session of the IMO Council, which met at Central Hall, Westminster, London. The International Maritime Prize is awarded annually by IMO to the individual or organization judged to have made the most significant contribution to the work and objectives of IMO. The 96th session of the IMO Council in June 2006 took the decision to award the prize to Dr.
New Underwater Cutting Rod from Broco
Broco Underwater announces its latest advancement in underwater cutting, the new advanced design Broco Ultrathermic Cutting Rod PLUS. Based on a new patent-pending design, Broco said its new underwater cutting rod delivers 20% more cutting and burn time than the same size prior generation rod, and burns more evenly than any rod on the market. According to the manufacturer, the new Broco Ultrathermic Cutting Rod PLUS increases burn time 20%, on average, for a 3/8” diameter by 18” long rod.
Foran Employed in Production Design of Pushboat
FORAN has been used by the naval architecture firm ROBERT ALLAN LTD. in the review of the production design of 6000 HP Shallow Draft Pushboat, to be built in Erin Shipyard in Manaus, Brazil. ROBERT ALLAN Ltd., a Naval Architecture and Marine Engineering Company based in Vancouver, Canada signed a contract with SENER Ingeniería y Sistemas S.A. (SENER) for the use of FORAN FVIEWER during this project. The 6000 HP Shallow Draft Pushboat was designed by ROBERT ALLAN LTD. for Hidrovias do Brasil. GHENOVA INGENIERIA & GHENOVA BRASIL are developing the complete 3D Model and 2D Production Design.
Robert Allan Sign Tugboat Design Contracts in Netherlands
Robert Allan Ltd informs of the signing of two contracts during a recent Canadian Trade Mission to the Kingdom of the Netherlands. The first signing covered the new ART 80-32, designed by Robert Allan Ltd. and incorporating a hybrid propulsion system developed by Aspin Kemp & Associates (AKA). The vessels are under construction at the Damen Shipyard in Poland and will enter the KOTUG fleet later this year. The second signing covered the recently awarded contract for three offshore Rotor tugs, destined for service at the Shell “Prelude” FLNG facility off the coast of Northern Western Australia.
Polarcus Appoints Starr as Next CEO
Rod Starr will succeed Rolf Ronningen as Polarcus' next chief executive officer. Following a comprehensive selection process, Polarcus Limited’s board of directors has chosen Rod Starr to succeed Rolf Ronningen as chief executive officer. Ronningen, who informed the board of his planned retirement in 2014, will continue as CEO until Rod takes up his appointment, expected early Q1 2015. Starr joins Polarcus from TGS-NOPEC Geophysical Company. He has over 30 years industry experience…
Pakistani Ship breakers Lauds 15% Duty on Import
Welcoming the latest policy, Ship breakers in Pakistan defended the imposition of 15% Regulatory Duty (RD) on the import of all steel billets, steel bars and wire rods. Describing the step as much needed and timely, the Pakistan Ship-Breakers Association (PSBA) lauded the imposition of RD. "The Pakistan Ship breakers Association salutes the Government of Pakistan for this bold move which has helped save hundreds of thousands of jobs as well as the local steel industry," it said in a statement.
OTC is a Success
New technologies and new ideas to sustain the growth of the industry overflowed at this year’s Offshore Technology Conference (OTC), bringing a record 51,320 attendees to Houston for four days. The conference was held 2-5 May at Reliant Center at Reliant Park in Houston. “Industry leaders gathered in sessions focused on the future of financing the offshore oil and gas industry to meet the world’s increasing energy demands and on recruiting personnel to replace the aging workforce,” said Rod Allan, OTC .05 Chairman. Allan added that an array of new technologies was presented for the first time. The Spotlight on New Technology program highlighted 14 innovative technologies that are already making the industry more successful.
Robert Allan Inks Contract with Uzmar Shipyard
Robert Allan Ltd. has announced the signing of a contract during the recent International Workboat Show in New Orleans, USA. Robert Allan Ltd. and Uzmar Shipyard signed documents commencing a new high performance escort tug project. Uzmar has now built over 90 Robert Allan designed tugs and workboats since the first project in 1996, ranging in size from 15m aluminium catamarans, to 36m escort tugs, to 46m shallow draft pushboats. This contract covers a new RAstar 3000-W design setup to accommodate propulsion packages of up to 90 tonnes of bollard pull while still staying under 500 GT.