Marine Link
Tuesday, November 21, 2017

First phase of DNV GL Led Offshore Cable and Pipeline Project completed

October 17, 2017

Photo: DNV GL

Photo: DNV GL

 The first phase of the DNV GL’s Joint Industry Project (JIP) which focuses on the development of a new design and certification standard for equipment for pipeline and cable offshore operations has been completed.

 
"The JIP, focussing on the development of a new design and certification standard for equipment for pipeline and cable offshore operations, aims to reduce uncertainty, cost, increase efficiency and safety throughout the lifecycle of the equipment," said a press release.
 
Pipeline and cable operations is a dynamic field of technology, with multiple players, leading to a level of complexity and lack of standardisation in the most common terms used within the oil and gas industry.
 
Phase 1, “Mapping the big picture”, focused on the identification and clarification of the following essential aspects:
 
The differences between the equipment types and the standard lifting appliances;
The building blocks and functional groups in the pipeline and cable operation deck spread.
A key attribute of phase 1 was the drafting of a glossary for the definition of the common terms used across the industry. “This in itself is a huge step forward in the standardisation process but there is still some work to be done during the course of Phase 2 on this task” says Dr.Eng. Marius Popa, JIP project manager, DNV GL – Oil & Gas.
 
The data analysed during phase 1 has identified and recorded various processes across the industry regarding equipment for pipeline and cable offshore operations. The activities of Phase 2 will be focused on the development of a separate standard for the pipeline and cable operations equipment that will harmonize the position of individual stakeholders and consolidate the trend for a standard approach throughout the lifecycle of the equipment.
 
Marius Popa, adds “The development of a standard for this type of equipment will create an industry wide consensus on an agreed set of practices to follow for the design and certification of these products as equipment, or as integrated parts in a system, dedicated to, and customised for, a specific asset. This will allow stakeholders to increase transparency and reduce the risk in the early phases of the equipment development and ensure consistency across the supply chain”.
 
Due, to start shortly, Phase 2 is planned to take 12 to 18 months.
 
 
The current JIP Partners are: Allseas Engineering BV, Amclyde Norson Engineering (a division of National Oilwell Varco), Aquatic Engineering and Construction (an Acteon company), IHC Engineering Business Ltd, IHC SAS B.V., INNOVO Engineering and Construction Ltd., MAATS Tech Ltd, Passer AS, Parkburn Precision Handling Systems Ltd, REEL S.A.S., Saipem, Subsea 7 and TechnipFMC.
 
New participants may, in principle, be accepted into Phase 2 should any company be able and willing to positively contribute to the project.
 
Maritime Reporter Magazine Cover Nov 2017 - The Workboat Edition

Maritime Reporter and Engineering News’ first edition was published in New York City in 1883 and became our flagship publication in 1939. It is the world’s largest audited circulation magazine serving the global maritime industry, delivering more insightful editorial and news to more industry decision makers than any other source.

Subscribe
Maritime Reporter E-News subscription

Maritime Reporter E-News is the subsea industry's largest circulation and most authoritative ENews Service, delivered to your Email three times per week

Subscribe for Maritime Reporter E-News