Marine Link
Thursday, December 12, 2024

World's First Fabrication of Subsea Well Part Using LiDAR Data and 3D Printing

Maritime Activity Reports, Inc.

October 31, 2016

 Fugro and 3D at Depth, a global provider of advanced subsea LiDAR systems and solutions, announce the world's first application of subsea LiDAR data used to 3D Print an accurate 1:1 physical model of a damaged well part

 
The ability to use accurate spatial data in subsea part fabrication with 3D printing, introduces a wide range of possibilities to reduce costs across intervention planning and Life of Field programs. 
 
The subsea part fabrication was part of a larger project conducted in early 2016, using 3D at Depth's subsea LiDAR SL 2 technology and point cloud software.
 
3D at Depth was contracted by Fugro to perform subsea laser scanning services on a well abandonment project in Oceania, Australia. The Plugged and Abandoned (P&A) wells located in a water depth of circa 110 meters, were drilled decades earlier and suspended at the time of drilling. 
 
Access to accurate data of the manufacture and specifications of these wellheads was limited due to their age. In order to assess feasible options for abandonment, detailed measurements needed to be acquired to achieve final abandoned status.
 
The survey used Fugro's multi-role intervention vessel, the "Rem Etive" fitted with two work class remotely operated vehicles (ROVs). One of the two FCV Work Class ROVs, of 3000m depth rating, was fitted with an SL2 Subsea LiDAR laser, manufactured and operated by 3D at Depth. The laser was mounted on the crash bar of the Fugro FCV3000 WROV sending near real-time data to the operator on the vessel via a fibre optic multiplexor.
 
Approximately 44 million data points were collected at the well in 13.5 hours. The LiDAR laser data was processed using point cloud processing tools to compute the spatial relationships, measurements and orientations of the seabed structures. 
 
The resulting deliverables included a 3D point cloud database, a dimensional report for each well, CAD files and a 360° animation of each well, modelled from the point cloud.
 
To create a 1:1 model for the design of an appropriate 'hot tap' connector, a 3D print of the top of the well, with its damaged stub, at full scale was required. As the large size of the well cap structure made the cost prohibitive, a hybrid Computer Numeric Control (CNC) machining process, combined with a 3D print of the damaged part, was proposed by 3D at Depth as a viable alternative solution.
 

Subscribe for
Maritime Reporter E-News

Maritime Reporter E-News is the maritime industry's largest circulation and most authoritative ENews Service, delivered to your Email five times per week