Aegean Exits Singapore Bunker Market
Aegean Bunkering Pte Ltd on Friday said it had this week left the world's largest marine fuels market in Singapore after handing back its supply and craft operator licences. The company had announced in October that it would halt physical supply operations in Singapore by January amid heightened commercial pressures after the city-state adopted tougher bunkering procedures. Aegean Bunkering, headquartered in Greece, was last year ranked the 20th largest marine fuels supplier by volume in Singapore from a total of 55, data from the Maritime and Port Authority of Singapore (MPA) showed.
Yanmar Rolls Out New Marine Power Offerings
Yanmar has already introduced several new products for the marine market in 2018, including a new common rail inboard marine diesel engine touted as the world's smallest, higher horsepower offerings in its mid range series, and expanded joystick controls. Yanmar Marine International has launched the latest addition to its family of new generation common rail (CR) diesel engines, the compact Yanmar 3JH40 inboard engine, at boot Düsseldorf. The three-cylinder 3JH40 has been developed as the marine industry’s smallest CR inboard diesel engine, Yanmar said.
MAN OVERBOARD Prevention & Recovery Workshop
The 2018 MAN OVERBOARD Prevention & Recovery Workshop is being held at the Grand Harbour, Southampton, U.K. on April 17. All sectors are invited to participate in this unique one day event that focuses on viable solutions. Knowledge gained about the deadly risks of people falling in the water from recent incidents with sub IMO / sub 24 meter vessels is becoming increasingly relevant to vessels of all sizes. Workshop organizer, John Haynes, said, “Topics focus on visible issues today, plus hidden areas of concern the professional maritime sector may need to face tomorrow.
NEXT GENERATION Marine Power & Propulsion Conference
The NEXT GENERATION Marine Power & Propulsion Conference is being held at the Grand Harbour, Southampton on April 18 and 19, 2018. All sectors are invited to participate in this unique event that focuses on viable solutions for sub IMO / sub 24 meter vessels. As most new power and propulsion technology is proving to be scalable this knowledge is becoming increasingly relevant to vessels of all sizes. Conference organizer, John Haynes, said, “It is clear that emerging technologies including the use of electric drives linked to lithium-ion batteries…
MACC 2004: Multi-Agency Craft Conference set for June 15-17
One of the more unique conferences — the Multi Agency Combat Craft (MACC 2004) — is set to take place again this month. MACC provides a forum for open exchange and discussion about boat and craft between Government agencies and the maritime community. In addition to topical conferences and an exhibition venue, a unique aspect of MACC are the numerous in-water boat demonstrations. The primary focus of MACC is the dialog between the DoD and other Government agencies on common issues unique to boats and craft in their service. The types of craft discussed range from Army & Navy service craft, Navy and Coast Guard patrol boats, to Naval Special Warfare and Marine Corps combatant craft.
Dive Support Vessel Delivered to Stapem Offshore
The first of two new 18-meter catamaran dive support vessels built for Paris-based Stapem Offshore has been delivered by South African shipbuilder Legacy Marine Group. The Marshal Island-flagged vessel, Stapem Beluga, will operate in the coastal waters of Angola in support of oil and gas exploration and production. The vessel, designed by Incat Crowther, has been customized to suit Stapem’s specific operational requirements. The aft exterior deck utilizes available space by combining deck lockers and racks for diving equipment storage with a covered dive prepping area.
Kvichak Completes Navy MPF Utility Boats
Kvichak Marine Industries completed the construction and delivery of 10 each MPF utility boats for the United States Navy. The 40-ft. high-speed landing craft replace the Navy’s existing LCM-8 craft as part of the Improved Navy Lighterage System in support of pre-positioned Marine Amphibious assault missions. The 40 x 14 ft. landing craft have a loaded cruise speed of ~25 knots and a lightened flank speed of ~40 knots. The propulsion package includes: twin Cummins QSM11 engines rated for 660hp at 2300 rpm, ZF 325 marine gears, and Hamilton 364 water jets. To ensure the safety and efficiency of transporting 30 troops, their gear and / or general cargo the craft utilizes a house aft configuration and an articulated bow door for beach deployment.
Ocean Craft Introduces New Multi-Mission Hull
Ocean Craft Marine Unveils a New High–Performance, Vessel Interdiction and Boarding Team Delivery Craft. Ocean Craft Marine unveiled their new brand of boats and new high-performance Vessel Interdiction and Boarding-Team Delivery Craft (VI-BTD) last week at the High-Performance Craft Expo (HiPer Craft) 2012 in Norfolk, Virginia. These unique high-performance boats were specially designed for elite law-enforcement and military mariners. “We saw unique opportunities to partner with…
Titan to Develop and Build Navy X-Craft
The Titan Corporation has been awarded a $59.9 million contract by the U.S. Navy's Office of Naval Research (ONR) to develop and build the Navy's "X-Craft." The X-Craft will be a high-speed aluminum catamaran consisting of an advanced hull geometry, designed to give the craft speeds of 50 knots or more. Initially it will be used by ONR for purposes of hydrodynamic experimentation to include the addition of advanced lifting bodies and polymer drag reduction techniques. The X-Craft's deck will have two helicopter landing spots capable of handling a variety of aircraft up to the size of the H-60 helicopter series. With a design displacement of approximately 1,100 long tons, the X-Craft will be self-deployable and of flexible design for spiral technology insertion.
Survival Craft Invests & Expands in North America
Survival Craft Inspectorate, a global provider of emergency marine evacuation systems, has acquired an industry innovation widely used in the cruise ship industry and announced plans to open two new offices in North America. The energy sector specialist expects these latest developments to add £10m (US$ 15.8m) to its turnover in the next three years. The opening of new offices in Fort Lauderdale in the United States and St John’s in Canada will create 10 jobs. Survival Craft Inspectorate has 90 staff based in Aberdeen…
VesselVanguard wins Chris-Craft Order
Digital Boat Profile and Customer Service Portal Gives Cutting Edge Options for Vessel Management to Boat Owners Palm Beach Gardens, Fla. VesselVanguard, infomred today a new relationship with Chris-Craft to provide a two-year subscription for its award-winning maintenance management solution to every new owner of a Chris-Craft model over 32 feet. With over a 140-year heritage of building distinctive powerboats, Chris-Craft has long been synonymous with the highest standards. Each Chris-Craft is an example of a timeless style blended with seaworthy functionality.
USCG Address Passenger Ships with Unfit Survival Craft
The US Coast Guard issued a policy letter outlining enforcement action to be taken when its inspectors find passenger ship survival craft (lifeboats or life rafts) damaged or otherwise not fit for service. While the details can get complex, the policy largely provides that the inspector should temporarily reduce the maximum passenger capacity of the ship by the capacity of the unfit survival craft if that craft can not be replaced prior to the next voyage. PCV Policy Letter 06-08 source: HK Law
HiPer Craft 2012 Set for June 26-27
Less than one week remains before the High Performance Craft Expo (HiPer Craft) 2012 on June 26-27, 2012 at the Half Moone Cruise and Celebration Center, proudly hosted by the American Society of Naval Engineers (ASNE). This special event is free for military and government to attend and ASNE offers reduced rates (see below) for industry and other attendess. HiPer Craft 2012 has something for everyone, whether you're a supplier, operator, maintainer or equipment vendor in the high performance boat and combatant craft community.
Navy Extends LCAC Service Life by Upgrades
Landing Craft Air Cushion (LCAC) modernization programs keeps them operational until replaced by the new 'Ship to Shore Connectors'. Originally designed to be in service for 20 years, the program will extend the class’s operational life to 30 years. The fully amphibious LCACs are capable of carrying a 60 to 75 tons of equipment, including M-1 tanks , while travel at speeds of more than 40 knots. Because they ride on a cushion of air — no part of an LCACs hull penetrates the surface of the water — the vessels are less susceptible to mines than other assault craft or vehicles.
Trinity Yachts Delivers First of Two Patrol Craft
Trinity Yachts, L.L.C., through its wholly owned subsidiary, Trinity Offshore, L.L.C., has delivered the first of two aluminum 82 ft. patrol craft it is building in New Orleans under a sub-contract to United States Marine, Inc., (U.S.M.I.) of Gulfport. The craft design is similar to those built for United States Special Operations Command (SOCOM) in the late 1990’s by the Trinity Marine Group. These vessels are still in service today. The first hull was recently delivered to U.S.M.I. for outfitting and the second hull is scheduled for delivery to U.S.M.I. in late March 2009.
Coastal Interceptors for Kuwait Coast Guard
Following an extensive evaluation protocol, the Kuwaiti Ministry of the interior has placed an order with Tampa Yacht Manufacturing LLC based in Florida – U.S.A, parent company of Tampa Defence UK and Tampa Defense USA, for 29 Fast Coastal Interceptor craft for the Kuwaiti Coast Guard. The 14.42M craft are powered by Man R6-800 diesels rated at 1600hp. The Tampa Yacht 44 FCI has a top speed of 55+ knots at full load and a range of over 300 nautical miles at 38 knots. With a crew capacity of up to six Coast Guard personnel the craft is equipped with NIJ111A ballistic armour…
Regulations for Singapore's Kusu Pilgrimage Season
The 2015 Kusu Pilgrimage season will commence on 13 October 2015 and end on 11 November 2015. During this period, many ferries and harbour craft carrying passengers would cross the East Keppel Fairway when plying between the MSPand Kusu Island (Pulau Tembakul). Mariners shall keep a proper lookout for these craft and navigate with extra caution when in the vicinity of the recommended routes. The traffic movement within MSP has been divided in two routes. The ferries and bumboats shall use the recommended routes as indicated.
Bonhomme Richard Certifies Well Deck Operations
The multipurpose amphibious assault ship USS Bonhomme Richard (LHD 6) was certified for well deck operations April 26, following two days of ship-to-shore maneuvers off the coast of Southern California. Bonhomme Richard launched and recovered a wide variety of landing craft, including amphibious assault vehicles (AAV), utility landing craft (LCU) and combat rubber raiding craft (CRRC). The ship also launched and recovered lightering amphibious recovery craft (LARC) for the first time in almost five years. A month earlier, BHR operated with air cushion landing craft (LCAC). “It takes a lot of training to launch and recover the various landing craft Bonhomme Richard supports,” said Senior Chief Boatswain’s Mate (SW) Mark Cass, deck department leading chief petty officer.
MCA Researches High-Speed Craft
The U.K. Maritime and Coastguard Agency (MCA) has assumed a series of projects researching aspects of the stability of craft certificated under the IMO Code of Safety for High-Speed Craft (2000). Following recommendations by the High Speed Craft Advisory Group (an MCA consultative committee), proposals were submitted to the Research Board in 2002, and contracts have been awarded during the first few months of 2003. Project 501 is investigating the mechanics of raking damage of high-speed craft, taking into account hull material and scantlings, and the vessel’s displacement and speed. The objective is to determine scientifically the extent of damage that should be considered on such craft if a level of safety equivalent to conventional merchant shipping is to be attained.
FRC Test Coxswain Course For RIBs & High Speed Craft
FRC International has developed a unique training course and qualification for the professional maritime sector. The Test Coxswain course is designed for both experienced crew members and technical staff who support both the specification and Test & Evaluation (T&E) of high performance craft. As the complexity and cost of high speed craft increases it has become more important that these craft are fit-for-purpose. Assessment needs to be objective, valid and reliable. Gone are the days of an individual coxswain saying ‘that's OK’ to approve an acquisition worth millions of Dollars.
Gulf Craft to Invest $100m in Dubai Shipyard
Dubai Maritime City (DMC), a maritime cluster in Dubai, today announced an agreement with Gulf Craft to invest in a free hold plot located within the marine district of DMC, on an area of approximately 900,000 square feet. According to DMC, Gulf Craft plans to make a $100 million investment in developing this facility over the next five years. It will include a state-of-the-art shipyard to manufacture high-end luxury yachts as well as a service center incorporating cutting-edge, highly specialized technology for the yacht industry.
Silver Ships to Build 36 Navy Boats over Five Years
Silver Ships, Inc. was awarded an Indefinite Delivery Indefinite Quantity (IDIQ) contract to provide the U.S. Navy with the follow on variant of the 11-meter Naval Special Warfare (NSW) Surface Support Craft (SSC) for a total of 36 boats over a five-year period. The 11-meter NSW SSC is an aluminum deep-vee hulled boat with a protective collar for open water utility operations. Crafts are used from inland bays and waterways to deep water over the horizon transits, in all operating conditions and weather. Open ocean diver and swimmer support, safety craft, medical transport, alongside vessel operations, combat craft and parachutist water airdrop training support, over-the-horizon training evolutions.
'Survival Craft Inspectorate' Signs Middle East Agreement
UK-based 'Survival Craft Inspectorate' signs deal to provide for Qatar's onshore & offshore energy sector LS equipment needs. Survival Craft Inspectorate has signed an agreement that will see it establish an operational presence in the Middle East for the first time. The UK-based business has established formal links with Qatar-based IRM Offshore Services in the latest extension of its network of international bases. Senior figures from Survival Craft Inspectorate travelled to Doha to sign a memorandum of understanding with IRM counterparts in the presence of H.E.