Marine Link
Friday, March 29, 2024

Trelleborg's Fender System Patented

Maritime Activity Reports, Inc.

April 22, 2015

Photo courtesy of Trelleborg

Photo courtesy of Trelleborg

Trelleborg’s marine systems operation has received a patent for its innovative ‘slide in, slide out’ or ‘SISO’ marine fender system, which is now in operation in Dampier, Western Australia, in addition to a number of other sites across the region.
 
The system has been designed to make fender maintenance more straightforward and less time consuming, by utilizing removable sliding panels, reducing the time taken to complete a fender wear pad change-out.  
 
Richard Hepworth, President of Trelleborg’s marine operation, said, “For the marine systems operation, this means looking for ways to help ports operate more efficiently.  Thanks to in-house design and testing capabilities, we were able to develop the new system, which will reduce customers’ maintenance time, reduce downtime and save money over the long term.”
 
For a typical fender frame system, ultra-high-molecular-weight polyethylene (UHMWPE) wear pads, which act as the contact faces for the vessel in berthing, are fixed directly to a fixed frontal frame via a bolt fastening arrangement.
 
Over time, due to factors such as high or heavy usage, large ships coming in to berth, arduous weather conditions – or a combination of the three – these UHMWPE wear pads wear away because of abrasion with the ship’s hull.
 
In Trelleborg’s SISO system, the UHMWPE wear pads are bolted onto two stainless steel removable panels.  These panels are then inserted into a guide rail on the front face of the fixed frontal frame.
 
The sliding panels can then be easily lifted out of the frontal frame and replacements reinserted within two hours – reducing downtime on the berth and keeping operations running punctually.
 
The original panels can then be transported onshore for maintenance and have their UHMWPE wear pads replaced, ready to be used as spares for the next fender wear pad change-out operation.
 
The system also reduces the safety risks associated with completing a pad replacement work from a workboat, as all activities are undertaken from the berth as opposed to on a workboat that is subjected to wave movements.
 
The system is now in use at a site in Dampier, Western Australia.  In this case, upon arrival, each fender module was hoisted into the correct orientation and simply bolted onto the supporting dolphin headstock structure. In removing the final assembly process offsite, both time and labour costs were considerably reduced. In addition, the time taken to assemble each fender module to the dolphin structure was cut down too.
 
To further reduce operational downtime on the berth during installation and retro-fitting of these fender systems, Trelleborg supplied fully assembled fender modules. Each of the eight fender systems, comprising of a SISO frontal frame, SCN2000 super cone fender rubber and fender support panel, was assembled by Trelleborg with all operational chain systems connected and secured in place before shipping.
 
For LNG and other gas terminals that Trelleborg has supplied with the SISO system, the product has been further developed and refined to prevent metal to metal contact, thus reducing the possibility of spark ignition onsite.

 

Subscribe for
Maritime Reporter E-News

Maritime Reporter E-News is the maritime industry's largest circulation and most authoritative ENews Service, delivered to your Email five times per week