World's First: Drone Brings Cargo to Offshore Production Platform

Maritime Activity Reports, Inc.

August 28, 2020

Image by Ole Jørgen Bratland/Equinor

Image by Ole Jørgen Bratland/Equinor

Norwegian oil company Equinor has successfully sent a drone carrying a 3D-printed cargo from shore to an offshore production platform in the North Sea in what the company says is a world's first.

In a flight spanning around 80 kilometers from the Mongstad base onshore to the Troll field in the North Sea offshore Norway, the drone carried a 3D-printed part for the lifeboat system. The flight took one hour, at an altitude of approx. 5000 feet, or 1524 meters.

"The flight was a test, the world’s first of its kind, where an actual freight operation was conducted over a lengthy distance to an operating offshore installation. The drone was a Camcopter s-100 model, manufactured by Schiebel," Equinor said.

“Development is rapid, and we see a huge potential within drone technology that could transform the way we operate, both under and above the sea surface. Equinor aims to lead the way in utilising new technology on the Norwegian continental shelf,” says Arne Sigve Nylund, Equinor’s executive vice president for Development and Production Norway.

“Drones could reinforce safety, boost production efficiency and contribute to lower CO2 emissions from Norwegian oil and gas. Drones will also play a role as we shape new energy solutions on the Norwegian shelf,” Nylund continues.

According to Equinor, the drone of the type that carried out the operation has been thoroughly tested and has logged around 70,000 flying hours from other types of operations within the defense and coast guard services. 

The drone is more than four metres long and weighs in excess of 100 kilograms. It has a cruising speed of more than 150 km/h and it can carry cargo weighing up to 50 kg.

The operator of the drone is the Sandnes-based company Nordic Unmanned.

"Equinor and the drone operator have enjoyed good cooperation with the Civil Aviation Authority, Avinor Air Navigation Services and the Norwegian Communications Authority in completing this ground-breaking transport operation," Equinor said.

Image by Ole Jørgen Bratland

“Over the longer term, we expect to see new infrastructure for logistics and support operations, which can reinforce what we already have within vessels and helicopters,” says Alena Korbovà Pedersen, who heads the work on developing logistics solutions in Equinor.

“If we are to develop the logistics solutions of the future on the Norwegian shelf, where drones could play an important role, we must cooperate across all of the industry’s players; operating companies, suppliers, the authorities and the trade union and safety interests,” Pedersen continues.

In addition to conducting logistics operations, Equinor says airborne drones can also be used for inspections and observations of the technical condition of our offshore installations and onshore facilities. 

"They have extremely advanced camera equipment and can be used in search and rescue operations, for example to locate people who have fallen into the sea, or for early detection of pollution on the sea. These abilities were also tested during yesterday’s flight," the company said.

Image by Ole Jørgen Bratland
Equinor says drones will also play a role in new energy solutions on the NCS. 

"Drones can inspect wind turbines, deploy equipment to be used by personnel performing maintenance and repairs, and they can deliver critical parts, fast. Using drones will also enable us to avoid some vessel lifts that can be both more costly and leave a greater environmental footprint," the Norwegian energy giant said.

Equinor said: "The fact that we chose a 3D printed part for our first drone transport offshore was a very natural choice. 3D printing is another rapidly growing technology that will transform the way we work. The part we transported was a diesel nozzle holder – a critical component in the lifeboats on Troll A. 

"The part is no longer manufactured and is difficult to obtain. Therefore, the part was re-designed and modeled in 3D before an advanced metal 3D printer produced a replica in a sturdy, industrial alloy, Inconel 718. The part was manufactured quickly, and was delivered safely and efficiently to Troll A, Norway’s largest gas producer."



Related:

Maritime Reporter E-News subscription

Maritime Reporter E-News is the maritime industry's largest circulation and most authoritative ENews Service, delivered to your Email five times per week

Subscribe for Maritime Reporter E-News