Rexroth News

Bosch Rexroth has appointed Erwin Wieckowski, P.Eng. as the new President and CEO of Bosch Rexroth North and Central America based in Charlotte, NC, effective October 1, 2023.The role has been performed on an interim basis by Reinhard Schaefer in addition to his role as a member of the Divisional Board of Management with responsibility for Manufacturing. Schaefer will remain in the region to support the transition.“We are thrilled to have Erwin join our organization,” said Schaefer.

Safety of workers,structures, equipment and the environment are paramount in any offshore energy project. In the March/April print edition, Offshore Engineer took a look inside some notable newcomers.Wearable tech to boost drill floor safetyHaloGuard – Credit: TransoceanOffshore drilling contractor Transocean has recently deployed what it said was the offshore drilling industry’s first safety system that integrates a wearable locating device with drill floor equipment and machine stoppage controls.The system…

Tip #1: Tribology - Assume All Hydraulic Components are Designed EquallyBelieve it or not, maintenance begins during the design phase. Moving parts create friction, and friction can lead to wear, ending in premature failure, especially when tribology is ignored. In order to have a long-lasting hydraulic system, it is critical to specify operating conditions and environment during the project start. When all conditions are considered, it is possible to select the right component…

Paul Cooke, President and CEO of Bosch Rexroth North America, based in Charlotte, NC, USA, will retire on December 31, 2020 after 38 years of service in various international positions within Bosch Rexroth. His successor as of December 1, 2020 will be Greg Gumbs, most recently Vice President & General Manager Electrical Automation Solutions at EATON Corporation. Gumbs will join Bosch Rexroth effective September 1, 2020 in preparation for his future responsibility and will be based at Bosch Rexroth North American headquarters in Charlotte…

The marine industry brings its own unique set of challenges.With the ‘All Subsea Factory’ market trend moving offshore exploration and production equipment for oil and gas to the seabed, safety, longevity and environmental protection are just a few of the considerations when choosing marine products. When selecting products for marine applications, the understanding of factors such as marine certifications and inspection documents are crucial to making an informed decision.Worldwide statutory provisions enacted by the United Nations (UN) agency on shipping specify general regulation and rules necessary to obtain an operating license for all categories of ship, marine and offshore applications.

Fugro, the global geo-data specialist, has awarded a contract to Bosch Rexroth to fully maintain and further improve Fugro Synergy’s hydraulic equipment.Fugro has worked with Bosch Rexroth for over a decade to ensure it has the best hydraulic systems and software solutions on board its geotechnical drilling vessel, the Fugro Synergy. Now, they are working together again in order to better prepare for the future.The Fugro Synergy vessel has been in operation since 2009, and is primarily used to drill into the seabed in order to analyse whether it can be safely used as a foundation for structures like wind farms or oil rigs. This ship was built to be effective in the harshest conditions…

Wave-generated power could be considered the Rodney Dangerfield of offshore renewable energy sources; it gets no respect. There have been a number of high-profile, expensive failures that have conspired to give the sector a poor reputation despite a number of engineering advances. A new entrant is SurfWEC offering a patented “surf-making” Wave Energy Converter which has been in development since 2007. Its developers promise it will stand out from the field and perform where others have failed. How?

Bosch Rexroth said its GoTo Focused Delivery Program has marked its 9th consecutive year of growth by offering a strong product portfolio of thousands of Rexroth products with best-in-class lead times.The program continues to offer high demand products across Rexroth’s broad range of technologies for fast delivery. Considering product-dependent maximum order quantities, customers benefit from short lead times and unrivaled simplicity. More than 99 percent of the products in the program ship in 10 days or fewer, with the same lead times in the U.S., Canada and Mexico.

Wagenborg awarded Barge Master a contract for a second 3D motion compensated crane for its new walk-to-work vessel Kasteelborg. The first motion compensated crane on the Kroonborg has increased the workability from approximately 180 to 330 days per year. “The crane works quite happily in three meter seas,” said Haije Stigter, former program manager at ONEgas/Shell, notes - adding that it “works like a dream.”The Barge Master Crane, as configured for the Kroonborg, makes it possible to continue safe and stable crane operations even in the North Sea’s famously rough conditions.

Longitude Engineering reportedly has developed a cost effective decommissioning barge concept for the removal of small oil and gas platforms for the PTT Exploration and Production (PTTEP), a subsidiary of the Thai state owned oil company. The aim was to develop a viable and cost-effective alternative to conventional ‘reverse installation’ through the use of heavy lift crane barges for the removal of the topsides and jackets. The focus being the removal of 90-100 of PTTEP’s minimum facilities platform assets in the Gulf of Thailand…

Gladding-Hearn Shipbuilding, Duclos Corporation, delivered again for New York City-based Circle Line Sightseeing Cruises, Inc., this the sixth 165-ft., 599-passenger sightseeing vessels. Designed by DeJong and Lebet, N.A. and builf from steel, the 165 x 34 x 12.8 ft. vessel has a top speed of 14 knots powered by twin Cummins QSK-38M1 diesel engines delivering a total of 2600 hp and connected to ZF W3355 gear boxes, spinning 60-inch, 5-bladed bronze propellers. For dockside maneuvering, the vessel is equipped with a 125 hp Wesmar bow thruster, powered by an electric motor.

2017 marks Bosch Rexroth’s 50th year of continuous operation in the United States. Starting with a small office in Easton, Pa. in 1967 and a handful of associates, Rexroth grew to expand into a newly built hydraulics manufacturing facility seven years later, the cornerstone of the company’s current manufacturing campus in Bethlehem, Pa. As Rexroth expanded globally, so did the company’s operations in the U.S., eventually identifying itself as “The Drive & Control Company.” Under this claim…

VOS Start, Vroon BV’s first DP2, subsea-support, walk-to-work (W2W) vessel has departed Damen Shiprepair Oranjewerf following the installation of a first of its kind motion-compensated gangway system by Barge Master and Bosch Rexroth, the extended installation of a Kongsberg reference system (including a ‘windfarm module’), and an active heave-compensated crane from SMST. The 80m VOS Start arrived at Oranjewerf on June 1 from her build yard in China, staying for eight weeks in the yard to also undergo various other upgrades and preparations for her first project…

Barge Master and Bosch Rexroth have jointly introduced a new motion compensated gangway to the offshore wind market. After numerous simulations and virtual tests, the first actually manufactured gangway is currently being tested onshore at the Bosch Rexroth facilities in Boxtel, the Netherlands. On June 21 this location was transformed into a presentation area, where the visitors were informed about the partnership between the two companies, and allowed to have a close look at the complex technology on the demonstrated gangway.

New from Bosch Rexroth are standalone axes with identical servo-drives for actuators with mechanical or hydraulic force transmission, offering new degrees of freedom for machine manufacturers in finding drive solutions that suit specific application requirements. The versions with hydraulic transmission are provided with their own, decentralized fluid circuit. The installation, commissioning and connection to controls and Industry 4.0 environments via a Multi-Ethernet interface or ProfiBus are identical on both variants.

Rexroth’s controller is now certified for use on ships, offshore installations and in explosive atmospheres. Six European and American certification boards have approved the IndraControl XM22 control hardware for use on ships and offshore installations even under extreme ambient conditions. The certifications include the control hardware, extension modules for the expansion of the communication interfaces as well as application-specific modules of the fast IndraControl S20 I/O portfolio. IndraControl XM is the latest powerful controller with IP20 protection.

PANOLIN HLP SYNTH 32 is the first and so far only eco-friendly hydraulic oil to feature in the Bosch Rexroth RDE 90245 Fluid Rating List. “Yet again, we have proven that our biodegradable products such as PANOLIN HLP SYNTH 32 also meet the highest industry requirements,” said Patrick Lämmle, Chairman of the Board of Directors of PANOLIN International. “PANOLIN HLP SYNTH is the first rapidly biodegradable hydraulic oil to obtain the Fluid Rating (ISO 15380 in combination with RFT-APU-CL test),” Lämmle said.

It was the biggest assignment Bosch Rexroth in Boxtel had ever faced, and it took more than two years to carry it out. But they seized with both hands the opportunity to research and supply the hydraulic components and associated local controls for the innovative lifting system on board the Pioneering Spirit, conceived and developed by Allseas. The request came from Allseas, an offshore specialist, or in fact from founder and owner Edward Heerema. A specially designed ship to lift entire offshore platforms off their piles in a single movement…

Gladding-Hearn Shipbuilding, Duclos Corporation, said it has delivered Circle Line Bronx, the first of three new sightseeing vessels for Circle Line Sightseeing Cruises, Inc., in New York City. “The new vessels will offer guests an enhanced sightseeing experience on every level,” according to Costas Markou, president and chief operating officer of New York Cruise Lines. Gladding-Hearn previously delivery three sister ships to Circle Line in 2009. Like the earlier vessels, the new 600-passenger all-steel vessel Circle Line Bronx…

Bosch Rexroth is launching a modular hydraulic power unit (HPU) program specially developed for the maritime and offshore market. These power units cover a power range of 350 to 3,000 kW, and have obtained the type approval by Lloyd’s Register. The program starts with a "basic" unit which can be expanded using all kinds of options. Because all variants are included in the modular options matrix, a design can quickly be calculated complete with dimensions and weights. Pierre Wouters…

Vroon has  announced that walk-to-work vessel VOS Start is to be equipped with the brand-new Barge Master Gangway. This unique combination will enable safe and efficient transfer of personnel and cargo. The Barge Master Gangway incorporates an access tower with elevator, providing stepless access. The adjustable pedestal provides full flexibility in landing heights. With the participation of Bosch Rexroth in the Barge Master team, the highest quality and safety standards are guaranteed. This unrivalled, next-generation walk-to-work vessel will be available to the offshore industry in Q2 2017.

The new Barge Master Gangway will be presented at the joint booth of Barge Master and Bosch Rexroth during the international offshore trade exhibition ONS (Offshore Northern Seas) in Stavanger. The next generation gangway, a result of cooperation between Bosch Rexroth and Barge Master, is designed for the safe and efficient transfer of personnel and cargo from ships to drilling and offshore production platforms, wind turbines and other ships. Barge Master specializes in the development and fabrication of motion compensating systems…

RSC Bio Solutions announced that its EnviroLogic 3068 and EnviroLogic 3100 high performance hydraulic fluids have been approved for use in MAN Diesel & Turbo systems. This approval allows RSC Bio Solutions to serve customers who have MAN stern tubes and propellers, primarily in the marine transport, ferry and fishing industries. The EnviroLogic 3000 Series consists of readily biodegradable synthetic hydraulic fluids designed for extreme operating temperatures and pressures. Because they are formulated to provide exceptional oxidation and thermal properties, these products are ideal for mobile or marine hydraulic and propulsion systems operating in environmentally sensitive areas, RSC Bio Solutions siad.