BAWAT Wins IMO BWTS Type Approval

Maritime Activity Reports, Inc.

November 4, 2019

Marcus Hummer (Photo: BAWAT)

Marcus Hummer (Photo: BAWAT)

Unique pasteurization treatment system sails through new tougher type approval process to give shipowners better peace of mind
BAWAT, the Danish manufacturer of a unique opex-neutral ballast water treatment system, has been granted IMO Type Approval for its technology that uses only a ship’s own waste heat to kill off invasive species.

Type Approval certification has been issued by Lloyd’s Register on behalf of the Danish Maritime Authority and makes the BAWAT system one of the first to be tested and issued with approval under the new toughened mandatory requirements of the IMO’s BWMS Code, officially known as the “Code for Approval of Ballast Water Management Systems.”

“To be one of the first systems to be awarded type approval under these new tougher conditions is a confirmation of the hard work we have put into what is the most sustainable treatment system on the market,” says BAWAT managing director chief Marcus Hummer. “It gives our customers the confidence that we have a product for their future needs.”

BAWAT’s system design is unique in using a vessel’s own waste heat from the main engine or other heat sources to neutralize through pasteurization any organisms in the ballast water.

“It does not require any chemicals, filters or energy consuming ultra-violet lights,” adds Hummer.

By using pasteurization  the BAWAT system can be used to treat ballast water in all water conditions, regardless of salinity, turbidity and temperatures, and has no holding time restrictions. Water is treated in one pass only.

The system is also unique as components such as the heat exchangers and pumps are all standard components found onboard vessels today, and therefor well known to crew.

A third defining difference with the BAWAT system compared with others is the ability to do in-voyage treatment, thus a vessel’s cargo and ballasting operations are not impacted due to slow water treatment.

The simplicity and effectiveness of the BAWAT system have impressed new investors who have backed BAWAT as it prepares to begin installing systems on both newbuilds and retrofits.

Under the IMO’s ballast water convention all vessels need to have a ballast water treatment system onboard to be able to meet what are known as the D2 standards. All newbuilding vessels need to enter service with a system installed and operational, and all existing vessels will in the coming years be required to have systems retrofitted as they have their certificates renewed.

“There are thousands of vessels that will require effective, simple and efficient solutions installed between now and 2024 when the last IMO deadline comes around,” adds Hummer. “For some owners the schedule will be tough and if taken at the last minute, costly. An easy to install, easy to manage, and net-zero energy consuming system is going to make sense”.

BAWAT is also waiting to hear from the US Coast Guard as the system goes through its own Type Approval procedures.

Maritime Reporter Magazine Cover Oct 2019 - Marine Design Annual

Maritime Reporter and Engineering News’ first edition was published in New York City in 1883 and became our flagship publication in 1939. It is the world’s largest audited circulation magazine serving the global maritime industry, delivering more insightful editorial and news to more industry decision makers than any other source.

Subscribe
Maritime Reporter E-News subscription

Maritime Reporter E-News is the maritime industry's largest circulation and most authoritative ENews Service, delivered to your Email three times per week

Subscribe for Maritime Reporter E-News