Fuji News

Iran said on Sunday it would strike the energy and water systems of its Gulf neighbours in retaliation if U.S. President Donald Trump follows through with a threat to hit Iran's electricity grid in 48 hours, escalating the three-week-old war.The prospect of tit-for-tat strikes on civilian infrastructure could deepen the regional crisis and further rattle global markets when they reopen on Monday morning.Air raid sirens sounded across Israel from the early hours of Sunday, warning of incoming missiles from Iran…

ClassNK has issued approvals in principle (AiPs) for the concept designs of Bulk Carrier installed with a Membrane-based Onboard Carbon Capture and Storage System (OCCS) and 83,000m3 Ammonia Carrier with IMO Type B Independent Tank developed by Oshima Shipbuilding Co., Ltd. These AiPs demonstrate its feasibility from regulatory and safety perspectives.The recipients of the AiPs, as well as the applicable rules and guidelines, are as follows:Bulk Carrier installed with Membrane-based OCCSRecipients: Oshima Shipbuilding Co.…

CIMC Raffles has awarded a contract to TMC Compressors to deliver a complete marine compressed air system for the MK II floating liquefied natural gas (FLNG) facility, currently under construction for Golar LNG.TMC’s scope includes instrument air compressors, utility compressors, nitrogen feed air compressors, and air driers. The company did not disclose the value of the contract.The MK II FLNG project involves converting Golar’s LNG tanker, Fuji LNG, into a floating liquefaction facility.

Japan’s MIHO Shipyard, a subsidiary of the Tsuneishi Group, has completed the transition to 100% renewable electricity derived from hydropower across all its facilities, including production factories and employee dormitories.The shift is expected to reduce annual carbon dioxide emissions by approximately 730 tonnes.The renewable electricity is sourced from hydropower generated by the abundant water resources of the Fuji, Abe, Oi and Tenryu rivers, all located within Shizuoka Prefecture.In parallel with its transition to renewable energy…

Golar LNG Limited sold the 2003 built steam turbine LNG carrier, Golar Arctic for $24 million before transaction-related expenses, wit the transaction expected to close, and the vessel is to be handed over to its new owner within Q1 2025. Following the vessel sale, Golar will have fully exited its legacy shipping business.The LNG carrier Fuji LNG discharged its final cargo as an LNG carrier in January 2025 and has now arrived in China, preparing to enter the CIMC shipyard for…

Kongsberg Maritime has secured a contract with Golar LNG, valued over $25 million, to provide an integrated package of electrical, control, safety and propulsion systems for the Golar MK II floating liquified natural gas (FLNG) vessel.Konsberg’s equipment will form key part of the new onboard systems for a major rebuild project in which Golar’s LNG tanker Fuji LNG, will be lengthened by nearly 100 meters and converted to a FLNG vessel.The work is being carried out at the CIMC Raffles shipyard in Yantai…

Mitsui O.S.K. Lines (MOL) has launched the Mitsui Ocean Fuji cruise ship, owned by MOL Group company MOL Cruises.The 32,477-ton Mitsui Ocean Fuji, the first cruise ship in Japan with all suite cabins, will offer a total of five debut cruise packages and one New Year's cruise through January 2025.In addition to cruises to and from Yokohama, it also offers cruises to andfrom Kobe and Nagoya, and cruise to and from Beppu, Shimonoseki, Shingu, Kochi, Nagoya, Sakaide, Kobe, Matsuyama…

Golar LNG signed an agreement with CIMC Raffles for a MK II Floating LNG Production (FLNG) vessel with an annual liquefaction capacity of 3.5 million tons of LNG per annum (mtpa).Black & Veatch will provide its licensed PRICO® technology, perform detailed engineering and process design, specify and procure topside equipment and provide commissioning support for the FLNG topsides and liquefaction process, similar to Black & Veatch’s role in the construction of Golar’s existing assets…

Japan received its first low-carbon ammonia cargo from Saudi Arabia on Friday, which it plans to use for co-firing with fossil fuels to reduce carbon emissions, a joint statement from the four companies involved in the deal said. Energy-poor Japan wants to add hydrogen and ammonia to its energy mix, a move criticized by climate activists as costly and not fully effective. Japan has agreed with a number of countries to study hydrogen and ammonia supply chains. Ammonia shipped to…

GriegMaas - a joint venture  of Norwegean shipping company Grieg Star with investment management firm Maas Capital - has expanded its fleet with the Ultramax vessel Star Damon.Formerly known as GH Frankel, the 2012-built Star Damon is bought this year from Celsius Shipping.The Ultramax vessel is 199 meter long, has a beam of 32 meter, and a draught at 13.3 meters. Star Damon will join the G2 Ocean conventional bulk pool.Meanwhile, the company has delivered its old open hatch vessel, the Star Fuji, for recycling."On the 21st of August we delivered the 34 year old Star Fuji for recycling. She landed at Leyal Ship Recycling in Aliağa, near Izmir in Turkey. That is the same recycling yard that recycled Star Gran in February," a release said.Star Fuji was an Open Hatch vessel of 40,850 mt dwt.

“No new fishing vessel has been (added) during the period,” says the email we get from Japan’s largest seafood company, Maruha Nichiro Corp. A year earlier, they had bought shares in New Zealand outfit, Sanford, which had just chartered a Nordic-looking vessel. Seafood rival, Nissui, had just done the same, buying New Zealand and Nordic. That all happened after the Naval Architect’s Society of Japan said a vessel based on the Icelandic design of Reykjavik’s Navis was its Ship of the Year.

Imabari Shipbuilding Co., Ltd. announced it has become the first shipyard in Japan to successfully install a SOx scrubber onto bulk carrier. The SOx scrubber, manufactured by Fuji Electric Co., Ltd., has been installed for a domestic ship owner aboard the 84,000M.T.D/W bulk carrier M/V Nadeshiko. The installation was completed on March 24, 2016. This installation is the joint research support project together with Class NK called “Main Engine Exhaust Gas Cleaning System (EGCS) installation on operating newbuilding vessel, and closed loop practicing test”.

Vessel sales for December 2015 (as of January 1) as prepared by Shipping Intelligence, Inc., New York.

A Blyth Workcat patrol boat nearing completion for the Kent and Essex Inshore Fisheries Conservation Area (KEIFCA) has become the first vessel in the UK to be treated with Duplex fouling release. The silicone coating is manufactured by Fuji Smart Surfaces and was chosen by KEIFCA for its new 17-metre boat, the FPV Nerissa, because it is able to prevent the adhesion of fouling without the use of toxins that would be harmful to the fisheries. It also provides the benefit of a long lifespan that eliminates the need for the boat to be regularly hoisted-out for fresh coats of antifouling to be applied. This saving in operational costs will…

Fuji Heavy Industries Ltd , the maker of Subaru cars, said it would continue flying car parts to its U.S. factory beyond an initial arrangement through the end of February, as a labor dispute at U.S. West Coast ports delays shipments. The Japanese automaker had said earlier it was spending an extra 7 billion yen ($59 million) for one month from the end of January to fly components such as engines and transmissions on chartered cargo flights instead of shipping them. A Fuji Heavy spokesman said arrangements had been made to extend that into March, although he said it was unclear how long that would continue.   Reporting by Chang-Ran Kim

Dozens of ships queuing to dock due to ports dispute; Honda slowing North American car production as parts held up. A labor dispute at ports on the U.S. West Coast is disrupting supply chains across the Pacific, forcing some Asian suppliers to resort to costly air freight and pushing up shipping rates as more freighters are caught up in long queues to dock. With ports near gridlock and cargo delays being felt throughout the U.S. economy, President Barack Obama on Saturday dispatched Labor Secretary Tom Perez to California to try to broker an agreement on a new contract between dockworkers and the group representing shippers and terminal operators. Ports along the coast, which between them handle nearly half of all U.S.

Japanese automakers are being forced to ship some car parts to U.S. plants by expensive air cargo and tweak production processes as a protracted labor dispute at U.S. West Coast ports shows no signs of letting up. Fuji Heavy Industries Ltd's Subaru, the fastest-growing brand in the United States, said this week that it now had to shoulder an extra 7 billion yen ($60 million) in costs a month due to air freight, which has seen prices go up with the extra demand. "It looked like the labor talks were going well at one point but in recent days the slowdown has grown quite severe," Fuji Heavy Chief Financial Officer Mitsuru Takahashi said. He said that without the move to chartered cargo flights, the automaker's U.S. production would have come to a halt in mid-February.

The fourth Russian-Japanese seminar ‘Сooperation in shipbuilding and ship repair’ is to take place September 4-5, 2014. For the first time, the annual event is to be held in St. Petersburg - the maritime capital of Russia . The event is being organized by Russian Maritime Register of Shipping (RS) and the Japan Ship Machinery & Equipment Association (JSMEA). RS Chief Operating Officer Pavel Shikhov said, "Russian Maritime Register of Shipping, which is one of the leading international classification societies…

Fairmount Marine’s multipurpose vessel Fairmount Fuji has assisted Italian contractor Saipem with her operations offshore Congo. Fairmount Fuji has performed several cargo runs between Siapem’s Boscongo yard in Pointe Noire and the offshore Congo moored drilling ship Siapem 1000. Fairmount Fuji also took care of the transport of Saipem crew. Drilling ship Saipem 1000, a fifth-generation drilling ship for ultra deepwater operations, was moored offshore Congo pending her next assignment. Fairmount Marine was contracted to assist in the crew change and in the transfer of cargo.

Shin Kurushima Dockyard Company has introduced Intergraph's 3D CAD/CAM software into the production phase of its ship projects. SKDY had chosen to standardize on SmartMarine 3D and successfully demonstrated its use of the industry-leading solution with a steel-cutting ceremony. With Intergraph's continuous enhancement of SmartMarine 3D, the solution has out-of-the-box content and functionality to support ship production. Today, SKDY has successfully incorporated its specific requirements into SmartMarine 3D, which are fully automated across its production processes. With support from Intergraph, SKDY is the first shipyard in Japan to implement SmartMarine 3D for the production stage, using its own built-in, automated rules.

Mitsubishi Heavy Industries, Ltd. (MHI) is taking steps to strengthen its cruise ship repair and conversion business. Recently, along with swift expansion of the cruise market in Asia it has become increasingly important for cruise companies, both Japanese and foreign, to differentiate their services and enhance their responsiveness to customer needs. Against this backdrop, MHI has received orders from Mitsui O.S.K. Passenger Line, Ltd. (MOPAS) and Nippon Charter Cruise, Ltd. (NCC) for repair and conversion work on the Nippon Maru and Fuji Maru, respectively.

Mitsubishi Heavy Industries (MHI) gets orders to carry out repair & conversion of the liners 'Nippon Maru' & 'Fuji Maru'. MHI has received orders from Mitsui O.S.K. Passenger Line, Ltd. (MOPAS) and Nippon Charter Cruise, Ltd. (NCC) for repair and conversion work on the Nippon Maru and Fuji Maru, respectively. The work will be performed at MHI's Yokohama Dockyard & Machinery Works in Kanagawa Prefecture between mid-December and the end of January 2013. The repair and conversion work on the two ships will be carried out in line with the medium- to long-range maintenance plans of MOPAS and NCC…

Fairmount Marine’s multipurpose support vessel Fairmount Fuji has supported Angolan maritime service provider Octomar Serviços Maritimos in underwater maintenance of the drilling rig Transocean Rather. The Fairmount Fuji hosted and assisted a diving team of Octomar during the six weeks job offshore Angola. The Fairmount Fuji is a multipurpose support vessel with a spacious aft deck of 280 square meters and with towing capabilities. Fairmount Fuji had just finished assisting Congolese…