Sbm Offshore News

Ambipar and SBM Offshore announced a solution for cleaning cargo oil tanks on (FPSOs), a solution that importantly is geared to completely remove humans from entering tanks during cleaning activities.“This robotic solution marks a turning point for the offshore industry. By automating a traditionally hazardous process, we are not only enhancing safety but also boosting operational efficiency and reducing environmental impact. It’s a clear demonstration of how innovation and responsibility can go hand in hand…

TMC Compressors (TMC) has secured orders for complete marine compressed air systems for 12 liquefied natural gas (LNG) vessel newbuilds and one floating production storage and offloading (FPSO) unit.As part of the first order, Hanwha Ocean picked TMC to deliver the marine compressed air system to 12 LNG vessels the South Korean shipbuilder is constructing for an undisclosed LNG shipping major.Under the contract, TMC will supply a complete system consisting of control and service air compressors, to each of the 12 vessels.

A consortium led by U.S. Exxon Mobil is about to begin the installation of its fourth floating oil production facility in Guyana, the South American country's maritime regulator said in a notice on Tuesday.The floating production storage and offloading (FPSO) facility 'One Guyana,' built by SBM Offshore with a 250,000 barrel-per-day capacity, departed from Singapore in mid-February.Once installed, the vessel will allow the consortium to boost output capacity to some 940,000 bpd later this year.

Mitsubishi Heavy Industries (MHI) and Single Buoy Moorings, the subsidiary of SBM Offshore, have agreed to conduct a study for the application of CO2 capture modules on future floating production storage and offloading vessels (FPSOs) for Petrobras.This study will be conducted toward typical implementation of CO2 capture solutions for FPSOs.The module design for FPSOs is based on a combination of MHI's proprietary Advanced KM CDR Process CO2 capture technology and SBM's Fast4Ward principles.The study will focus on capture of the CO2 emitted by onboard gas turbines…

SBM Offshore and Petrobras have signed an agreement to study the application of carbon capture modules on floating production, storage, and offloading (FPSO) units.The module design is based on an engineering and design study between SBM Offshore and Mitsubishi Heavy Industries (MHI), qualified by DNV. It is based on a combination of MHI’s proprietary CO2 capture technology and SBM Offshore’s Fast4ward principles.This compact modular solution allows a significant reduction of the overall emissions associated with the production of oil and gas from FPSOs…

Alexandre de Gusmão floating, production storage and offloading (FPSO) unit has departed in China and is now on its way to Brazil where it will be deployed at Petrobras’ Mero field, in the Santos Basin.The Alexandre de Gusmão FPSO left China on December 16, following the completion of the construction at COSCO Shipping’s shipyard and the delivery to leasing partners SBM Offshore and Petrobras.The FPSO can produce 180,000 barrels of oil per day and compresses 12 million cubic meters of gas daily.The unit is expected to start operations in 2025…

Preparing for industrialization, the floating offshore wind industry is tackling its unique mooring and cabling challenges.The idea of keeping floating offshore wind platforms in place using dynamic positioning has been considered. The trouble is: it could take up to 80% of the electricity generated by the turbine to do it.So, as Maersk Supply Service said a few years back: In a field of 100 turbines with 4-5 mooring lines each, there is going to be a lot of subsea “spaghetti.” It’s not a problem unique to the industry…

American Bureau of Shipping (ABS) has issued approvals in principle (AiPs) for a range of jetty-less new energy terminal concepts to move frequent, large-volume ammonia transfers away from shore, developed by SBM Offshore’s division IMODCO Terminals.IMODCO is applying a proven jetty-less system for moving crude oil to support the supply chain for new fuels such as ammonia.ABS reviewed the designs for IMODCO’s Catenary Anchor Leg Mooring (CALM) buoy, CALM soft yoke and Tower Loading Unit (TLU)…

Aize and SBM Offshore have entered a strategic five-year partnership aimed at integrating Aize software into vessels across SBM Offshore’s global fleet.The collaboration will encompass both the Engineering, Procurement, and Construction (EPC) and Operations and Maintenance (O&M) phases, enhancing efficiency and operational excellence.The implementation plan will be guided by the digital readiness of vessels and lead with the integration of Aize into vessels in production, closely followed by vessels in the EPC phase…

Hanwha Ocean announced it has hired Bram Van Cann as its new head of engineering for its offshore business.Bram brings to the role extensive expertise in the offshore and renewable energy sectors, with more than two decades of experience at SBM Offshore, ENGIE and Ocean Winds.

The ABS-classed Liza Unity has received the first REMOTE-CON notation for an floating production storage and offloading (FPSO) from ABS. The notation demonstrates the vessel’s alignment with remote-control functions and signifies that the design and construction of the offshore asset are assessed against and adhere to the ABS Requirements for Autonomous and Remote Control Functions.The Liza Unity is the second FPSO to be built for ExxonMobil Guyana’s Stabroek Block development and the first delivered under SBM Offshore’s Fast4Ward program.

The specialized deepwater oil & gas and floating offshore wind segments will share many of the same stakeholders and supply chains, competing for increasingly scarce resources.To receive a full version of Inteletus analysis, click hereThe established floating production segment is forecast to experience continued growth through this decade, driving demand for, among other things, moorings, subsea systems, umbilicals, risers, flowlines and the large anchor handlers and subsea support vessels that will install and maintain the elements.At the same time…

Japanese FPSO leasing firm MODEC said Thursday that the first steel-cutting ceremony for the Guyana-bound FPSO Errea Wittu had been held in China.MODEC secured its first order to supply an FPSO to Guyana in May 2023. The order came from an ExxonMobil-led consortium and is for the deployment of the FPSO to the giant Stabroek offshore block in Guyana, where Exxon already has three FPSOs in production, all three supplied by SBM Offshore.According to World Energy Reports, China's DSIC has the construction hull contract…

Chinese shipbuilder China Merchant Heavy Industries (CMHI) has contracted TMC Compressors (TMC) to deliver the completed marine compressed air system to a newbuild FPSO the Chinese yard is constructing for the Dutch FPSO leasing firm SBM Offshore.Under the contract, TMC will provide a large-capacity marine compressed air system, including compressors for control and service air on board the FPSO.TMC will manufacture and assemble the equipment in Europe and deliver it to CMHI in China.

Dutch firm SBM Offshore said Friday it had won contracts to perform front-end engineering and design (FEED) for a floating production, storage, and offloading vessel (FPSO) for the ExxonMobil-led Whiptail development project in Guyana.Following FEED and subject to government approvals in Guyana of the development plan, and project sanction, including the final investment decision by ExxonMobil, to release the second phase of work, SBM Offshore will construct and install the FPSO.

In a first, Brazilian oil company Petrobras last week reportedly sold the P-32 FPSO for sustainable recycling in Brazil, paving the way for the development of the local ship recycling industry.The sale of the floating unit P-32 reportedly took place on July 7, 2023. In a collaboration supervised by Petrobras, the steel company Gerdau S.A. and shipyard Ecovix have been entrusted with the responsible and environmentally sound recycling of the FPSO."This decision marks the first time a commercial vessel at the end of its lifecycle will be dismantled in Brazil.

The Brazil-bound FPSO Sepetiba sailed away from the BOMESC shipyard in China on June 16, 2023, following completion of the topsides integration and onshore commissioning phases.The unit—SBM Offshore’s third Fast4Ward FPSO—is transiting to the Mero field in the Santos Basin offshore Brazil, located 180 kilometers offshore Rio de Janeiro. SBM Offshore has a contract with Petróleo Brasileiro S.A. (Petrobras) for the 22.5 years lease and operation of FPSO Sepetiba. First oil is expected in the second half of 2023.The FPSO will have the capacity to produce up to 180…

Japan's MODEC said Monday it would proceed with engineering, procurement, and construction on the Uaru FPSO vessel following a final investment decision on the Uaru offshore oil project by ExxonMobil in Guyana last month.The Uaru FPSO is named ‘Errea Wittu’, which means ‘abundance,’ and will be the fifth offshore FPSO in Guyana and the first to be supplied by MODEC. The first four, two of which are now in production in the Stabroek block off Guyana, were/will be delivered by SBM Offshore.Apart from supplying the Errea Wittu FPSO…

Dutch FPSO specialist SBM Offshore on Tuesday announced the arrival of the FPSO Prosperity at the Stabroek Block offshore Guyana.The FPSO traveled just over 11,000 nautical miles – or just over 20,000 kilometers - from Singapore to Guyana in just under 50 days.On track for first oil later this year, Prosperity becomes Guyana’s third FPSO, joining two other SBM Offshore-delivered FPSOs, the Liza Destiny and Liza Unity.The FPSO will be spread moored in water depth of about 1,900 meters and is designed to produce 220…

Dutch FPSO leasing company SBM Offshore said Friday that the China-built hull of the FPSO ONE Guyana had entered drydock at Keppel Shipyard in Singapore. One Guyana is one of SBM Offshore's largest-ever FPSO Units and is being built for deployment at ExxonMobil-operated Stabroek Block offshore Guyana. "The FPSO ONE GUYANA project passing another major milestone: the vessel successfully entered drydock at the Keppel yard in Singapore. The project team will continue construction with the next steps being the installation of the mooring structures and riser balcony.

Singapore's Keppel Offshore & Marine said Wednesday it was on track to deliver a "mega" floating production, storage, and offloading vessel (FPSO) to SBM Offshore in the first quarter of 2023. This is the third FPSO that Keppel Shipyard is delivering to SBM Offshore and will be chartered to the consortium of ExxonMobil, CNOOC, and Hess, to operate in the Stabroek Block, offshore Guyana. The vessel was named Prosperity FPSO by Guest of Honour,  Arya Ali, the First Lady of the Co-operative Republic of Guyana at a ceremony held Wednesday at Keppel Shipyard.

Japanese floating oil and gas production systems provider MODEC has signed a contract to perform Front End Engineering and Design (FEED) for an FPSO vessel for ExxonMobil's “Uaru” oil field development project offshore Guyana.The FEED contract award relates to the initial funding by ExxonMobil’s subsidiary, Esso Exploration and Production Guyana Limited (EEPGL), to begin FEED activities related to the FPSO design and to secure the second M350TM hull for FPSO service.Following FEED and subject to government approvals in Guyana of the development plan…

The Dutch FPSO leasing specialist SBM Offshore said Friday the construction of the topside modules had kicked off in Singapore for one of the company's largest-ever FPSO units, the One Guyana FPSO."During September this year, two steel strike ceremonies were held in both Keppel FELS and DynaMac yards. This marks a key milestone, which is the start of the fabrication of the marine structures and the topside modules," SBM Offshore said.SBM Offshore received an order from ExxonMobil in April to deliver the One Guyana FPSO for the Yellowtail development offshore Guyana.