Marine Link
Wednesday, January 17, 2018

Steel Cut News

MV Werften Cuts First Steel for Crystal Endeavor

Tan Sri Lim Kok Thay pushes the button to start the first steel cut (Photo: MV Werften)

Shipbuilder MV Werften said it has begun building Crystal’s new luxury expedition yacht, Crystal Endeavor, with first steel cut on January 15 at its shipyard in Stralsun, Germany. Set to debut in 2020, Crystal Endeavor will be Crystal’s largest and most spacious purpose-built Polar Class ship featuring all-suite, butler-serviced accommodations, and adventure in polar regions and other remote destinations. Employees and guests watched as the flame cutter was launched by Genting Hong Kong Chairman and CEO…

Atlantic Marine Completes First Steel Cut

Atlantic Marine, Jacksonville, Fla., has accomplished its first cut of steel for its new fleet of 226-passenger U.S.-flag coastal ships, Delta Queen Coastal Cruises. The steel cut begins construction for AMCV, who in May 1999, signed a $60 million contract with Atlantic for construction of the first two vessels, as well as an option for a third. Measuring 300 ft. (91.4 m), the diesel-driven, coastal ships with nautical and Federal-style décor are scheduled to enter service in 2001 along the East Coast of America. "This project is on a fast track," said Scott Young, executive vice president of AMCV and president of The Delta Queen Steamboat Co. "Four hundred tons of steel have been delivered to the shipyard and sub-assembly is underway on the vessel modules."

First Steel Cut Completed

Atlantic Marine, Jacksonville, Fla., has accomplished its first cut of steel for its new fleet of 226-passenger U.S.-flag coastal ships, Delta Queen Coastal Cruises. The steel cut begins construction for AMCV, who in May 1999, signed a $60 million contract with Atlantic for construction of the first two vessels, as well as an option for a third. Measuring 300 ft. (91.4 m), the diesel-driven, coastal ships with nautical and Federal-style decor is scheduled to enter service in 2001 along the East Coast of America. "This project is on a fast track," said Scott Young, executive vice president of AMCV and president of The Delta Queen Steamboat Co. "Four hundred tons of steel have been delivered to the shipyard and sub-assembly is underway on the vessel modules."

Atlantic Marine Completes First Steel Cut

Atlantic Marine, Jacksonville, has accomplished its first cut of steel for its new fleet of 226-passenger U.S.-flag coastal ships for Delta Queen Coastal Cruises. The steel cut begins construction for AMCV, who in May 1999, signed a $60 million contract with Atlantic for construction of the first two vessels, as well as an option for a third. Measuring 300 ft., the diesel-driven, coastal ships with nautical and Federal-style decor are scheduled to enter service in 2001 along the East Coast of America. "This project is on a fast track," said Scott Young, executive vice-president of AMCV and president of The Delta Queen Steamboat Co. "Four hundred tons of steel have been delivered to the shipyard and sub-assembly is underway on the vessel modules."

Atlantic Marine Completes First Steel Cut

Atlantic Marine, Jacksonville, has accomplished its first cut of steel for its new fleet of 226-passenger U.S.-flag coastal ships for Delta Queen Coastal Cruises. The steel cut begins construction for AMCV, who in May 1999, signed a $60 million contract with Atlantic for construction of the first two vessels, as well as an option for a third. Measuring 300 ft., the diesel-driven, coastal ships with nautical and Federal-style decor are scheduled to enter service in 2001 along the East Coast of America. "This project is on a fast track," said Scott Young, executive vice-president of AMCV and president of The Delta Queen Steamboat Co. "Four hundred tons of steel have been delivered to the shipyard and sub-assembly is underway on the vessel modules."

World's First FLNG Vessel Steel-Cutting

A steel cutting ceremony for the hull of Petronas' first Floating Liquid Natural Gas (FLNG) held at the Daewoo Shipbuilding & Marine Engineering (DSME) shipyard in Okpo, South Korea. The steel cutting event signifies a major milestone for the project, which according to Petronas is the world’s first, and the construction phase now commences to meet its commissioning schedule in 2015. The ceremony was led by Petronas’ President and Group CEO, Tan Sri Dato’ Shamsul Azhar Abbas and was jointly hosted by Technip’s President & CEO Mr. Thierry Pilenko and DSME’s President & CEO Mr. Jaeho Ko. The floating LNG facility will be located in Malaysia’s Kanowit gas field, 180 kilometres offshore Sarawak and will have the capacity to produce 1.2 mtpa of LNG per year.

Huisman Holds Ceremony for Massive Tub Cranes

Photo courtesy of Huisman

Huisman held a steel cutting ceremony together with Heerema for the two Heerema 10,000mt Tub Mounted Cranes at their facility in China On Wednesday, 1 July. These world’s largest cranes will be installed onboard Heerema’s new semi-submersible crane vessel. The steel cutting event signifies a major milestone for the project to proceed to its construction phase to meet the delivery schedule by the end of 2018. Unlike traditional Tub Cranes which make use of either bogies or large wheels for their slew system…

Steel Cut for First Virgin Voyages Cruise Ship

Photo: Fincantieri

A steel cutting ceremony has signaled the start of construction for the first of three new cruise ships for the Virgin Group’s new cruise line, Virgin Voyages. The three new ships are being built by Fincantieri at its shipyard in Genoa, Italy for scheduled deliveries in 2020, 2021 and 2022 respectively. The combined order value is about 2 billion euros. Each ship will weigh about 110,000 gross tons, be 278 meters long and 38 wide. The ships will feature over 1,400 guest cabins that can host more than 2,700 passengers, accompanied by 1,150 crew members on board.

Meyer Turku Cuts Steel for New Mein Schiff

Courtesy MEYER WERFT

The production of a new generation of Mein Schiff ships started today at Meyer Turku shipyard, Finland, with the steel cutting ceremony. The new Mein Schiff 1, NB-1392, will be around 20 meters longer than the previous Mein Schiff ships and will have space for additional 180 cabins. The steel cutting for hull number NB-1392 or the new Mein Schiff 1 was started by Georgios Vagiannis, Project Manager Newbuild, TUI Cruises, in a ceremony at the steel hall of Meyer Turku. The first steel cutting marks the start of production of a new generation of TUI Cruises ships.

Steel Cut for Norwegian’s Next Cruise Ship

A steel cutting ceremony signaled the beginning of construction for Norwegian Cruise Line’s next cruise ship. (Photo: Norwegian Cruise Line)

Marking the beginning of construction of the second ship in Norwegian Cruise Line’s Breakaway Plus class, a steel cutting ceremony was held Tuesday, September 15 at Meyer Werft shipyard in Papenburg, Germany. The new vessel, named Norwegian Bliss, is scheduled to be delivered in spring 2017. Once completed, the ship will weigh 165,600 gross tons, measure 330 meters in length and 41.4 meters in breadth, and feature capacity for up to 4,200 guests, with the capability to reach speeds up to 23 knots, according to the shipbuilder.

Aker Philly Reaches Benchmarks on Tankers

With two tanker vessels already delivered on charter and in service to Overseas Shipholding Group, Inc. (OSG), Aker Philadelphia Shipyard, Inc. (APSI) has achieved major milestones on two subsequent vessels in the build program. The third product tanker in the series, Hull 007, has been floated from its berth in the yard's Building Dock, and steel cutting has been initiated for Hull 010, the sixth vessel in the series, marking start of production on that ship. lifting Hull 007 off its keel blocks in advance of the ship's move to the nearby Outfitting Dock, where testing and commissioning of the vessel will take place. Like its two predecessors, Hull 007's construction is being financed by a loan facility with Caterpillar Financial Services Corporation(Cat Finance).

VT Shipbuilding to Begin Offshore Patrol Vessel

VT Shipbuilding will start production of its latest export program on January 23 when the High Commissioner for Trinidad and Tobago starts the steel cutting process for the first of three Offshore Patrol Vessels at Portsmouth Naval Base. The 295-ft. ships will be used to help protect Trinidad and Tobago's oil and gas resources besides taking on constabulary roles such as environmental protection, fishery protection and anti-drugs operations. The first ship will be handed over in 2009.

STX Begins Construction of Tankers

Port News reported that the steel cutting for the new ship of PRISCO was held at STX Shipyard in South Korea. The new vessel is the first of seven tankers of 51,000 tonnes deadweight each, according to a report on http://steelguru.com. The main ship of this series is scheduled to put into operation on November, 2008. The other vessels are planed to be delivered by May 2009.

Latest Corvette for UAE Navy

Production work has begun on the last of six Baynunah corvettes being built for the UAE Navy by in the region’s largest-ever naval construction program. The Commander of UAE Naval Forces, Rear Admiral Ahmed Al Sabab Al Tenaiji, activated a computerized plasma cutting machine at ADSB’s Musaffah complex to begin cutting the steel for the sixth and final 72m vessel. The Baynunah Class vessels are highly sophisticated multi-mission corvettes equipped with cutting-edge combat systems and have the capability to perform a wide range of military operations…

Nansha Factory Cuts First Steel for Tanker Newbuilds

Construction begins on two 113,000 DWT product/crude oil tankers in Nansha Factory   A steel cutting ceremony was held at the Nansha Factory December 1 for the third and fourth of eight vessels of 113,000 DWT product/crude oil tankers for NAVIG8 Group registered in U.K.   Personnel from the builder’s business and operations management departments attended the opening ceremony, as well as signed the progress documents representing GSI with shipowners’ representative.   GSI signed eight shipbuilding contracts with NAVIG8 Group for building 113,000dwt product/crude oil tankers in August, 2013., and construction on the first and second vessels began in June, 2014.   chinagsi.com  

Steel Cut for Holland America Line’s ms Nieuw Statendam

Holland America Line celebrated a significant construction milestone today as the first steel was cut for ms Nieuw Statendam, due for delivery in November 2018. The ceremony took place at Fincantieri’s shipyard in Palermo, Sicily, Italy, and the block being built there will later be moved to the Marghera yard where the ship will be constructed. Holland America Group’s Executive Vice President of Fleet Operations Keith Taylor was at the yard for the event. The 99,500-ton ship — the 15th in the fleet — is the second Pinnacle Class vessel for Holland America Line, joining sister-ship ms Koningsdam that sailed its first cruise in April 2016. The steel cutting follows a period of design and development for the 2,650-guest ship that will feature enhanced Pinnacle Class amenities and innovations.

Steel Cut for Hapag-Lloyd’s New Expedition Ship

(Photo: Hapag-Lloyd Cruises)

The first steel cut on May 9, 2017 at the VARD shipyard in Tulcea, Romania marks the official start of the construction of Hapag-Lloyd Cruises’ first of two new-build expedition ships. In an official ceremony Karl J. Pojer, CEO of the luxury cruise operator, gave the official start signal for the construction process of HANSEATIC nature, and Roger Vassdal, Senior Vice President for VARD’s operations in Romania, handed over a symbolic steel silhouette of HANSEATIC nature to the Hapag-Lloyd Cruises’ board of directors.

Royal Caribbean Cuts Steel, Names Ships

The steel cutting took place at the Meyer Werft shipyard in Papenburg, Germany, where the two ships will be built. Pictured here are (from left to right) Jan Meyer, Managing Partner, Meyer Werft and Harri Kulovaara, EVP, Newbuild and Design, Royal Caribbean International.

Cruise Line Celebrates Project Sunshine milestone, Steel Cutting and Reveals Names of Newest Ships. Royal Caribbean International took a major step this week in the development of the cruise line’s next generation of cruise ships when the first piece of steel was cut for the first of two Project Sunshine ships. The steel cutting took place at the Meyer Werft shipyard in Papenburg, Germany, where the two ships will be built. To celebrate the milestone, Royal Caribbean announced the names of the two new ships – Quantum of the Seas…

Aker Philadelphia Begins Production on New Ship

Aker Philadelphia Shipyard has begun production on the second of ten vessels in the product tanker build program announced last spring, according to a WPVI-TV report. Steel cutting for the ship, the sixth built by the yard since its opening five years ago, begins just weeks after keel laying for the first tanker in the series. The second vessel is scheduled to be completed in 2007. The steel plates were cut on one of the yard's two plasma cutting machines. Once finished, the pieces will form part of the engine room of the 46,000 dwt product tanker. Upon completion, the tankers will be owned by American Shipping Corporation, a subsidiary of Aker American Shipping. Source: WPVI-TV

Aker Philadelphia Begins Tanker Construction

Aker Philadelphia Shipyard has commenced production on the third vessel in the ten-ship product tanker build program initiated in April 2005. Steel cutting for the ship, the seventh built by the yard since its opening nearly six years ago, was performed on one of the yard's two state-of-the-art plasma cutting machines. The third tanker vessel is scheduled to be completed in the fourth quarter of 2007. The first steel plates cut for the ship will be used in construction of the engine room of the 46,000 deadweight ton (dwt) product tanker. Upon completion, the tankers will be owned by American Shipping Corporation, a subsidiary of Aker American Shipping, and bareboat chartered to Overseas Shipholding Group, Inc (OSG).

Atlantic Marine Cuts Steel On AMCV Vessel

Atlantic Marine, Jacksonville, Fla., has accomplished its first cut of steel for its new fleet of 226-passenger U.S.-flag coastal ships, Delta Queen Coastal Cruises. The steel cut begins construction for AMCV, who in May 1999, signed a $60 million contract with Atlantic for construction of the first two vessels, as well as an option for a third. Measuring 300 ft. (91.4 m), the diesel-driven, coastal ships with nautical and Federal-style decor is scheduled to enter service in 2001 along the East Coast of America. "This project is on a fast track," said Scott Young, executive vice president of AMCV and president of The Delta Queen Steamboat Co. "Four hundred tons of steel have been delivered to the shipyard and sub-assembly is underway on the vessel modules."

Milestones in Aker American Shipping Tanker Series

achieved on two subsequent vessels. the series, has been floated from its berth in the yard's Building Dock. series, marking start of production on that ship. MT 46 Veteran Class tanker vessels under construction simultaneously. place. Overseas Houston, in American Shipping Corporation's (ASC) fleet. to Overseas Shipholding Group, Inc. arrangement to bring these vessels to U.S. waterways. on one of the yard's two state-of-the-art plasma cutting machines, with Ms. process. The fifth tanker vessel is scheduled to be completed in 2008.

Gondon Shipyard Expansion Underway

Photo: Gondan Shipyard

Gondan Shipyard announced it has completed a new stage of improvement and expansion at its facilities in Figueras, Barres and Castropol as part of an investment initiative aiming to bolster its competitiveness in the market by increasing production capacity and reducing construction times. The shipyard said it completed the enlargement of the blocks prefabrication and steel works workshop at its Figueras facilities by 25 percent and 15 percent, respectively. This, added to an optimization of the production processes, will help lead to increased production capacity.

Maritime Reporter Magazine Cover Dec 2017 - The Great Ships of 2017

Maritime Reporter and Engineering News’ first edition was published in New York City in 1883 and became our flagship publication in 1939. It is the world’s largest audited circulation magazine serving the global maritime industry, delivering more insightful editorial and news to more industry decision makers than any other source.

Subscribe
Maritime Reporter E-News subscription

Maritime Reporter E-News is the subsea industry's largest circulation and most authoritative ENews Service, delivered to your Email three times per week

Subscribe for Maritime Reporter E-News