New Tug Deliverd to Boluda

Boluda Towage and Salvage has taken delivery of the newly built VB Xaloc, the first tug of the owner’s multi-boat order from Astilleros Zamakona and first of Robert Allan Ltd.’s TRAktor 3200-V class escort tugs.

 

The TRAktor 3200-V was designed by Robert Allan Ltd. specifically to meet Boluda’s requirements for performance, propulsion equipment, accommodation facilities, tank capacities and all within a gross tonnage (GRT) limit of less than 500.

 

According to the designer, extensive computation fluid dynamics (CFD) studies were conducted early on to analyze hull form impacts on the expected bollard pull of the VSP units.

 

The vessel’s general arrangement, main engine performance requirements and specifications, and electrical power plant design evolved with collaboration between Boluda and Robert Allan Ltd. The result is a functional layout making maximum use of the relatively limited space on such a high-powered vessel with overall volume constrained by the 500 GT limit.

 

The completed vessel is a high-performance escort hull form with full focsle for operation in rough weather and a large functional aft working deck for efficient ship handling, escorting and recovered oil operations. The key hull particulars are as follows:

 

The tug was designed and constructed to BV Class requirements and has the following notation:

BV 1, + HULL, + MACH, Escort Tug, Fire-Fighting Ship 1 water spray, Oil recovery ship, Unrestricted Navigation, AUT-UMS, COMF-NOISE 3, IN WATER SURVEY

 

Primary tank capacities at 100 percent full are:

 

The vessel has been outfitted to a very high standard for a crew of eight. All accommodations are located on the main deck with fully MLC compliant cabins, each featuring a private en-suite toilet space.

 

The wheelhouse is designed with a single split control station for both ahead and astern operation with excellent visibility over the aft working deck. The efficiently laid out engine room includes a separate switchboard room and separate engineer’s workshop.

 

Main propulsion consists of a pair of MAK 8M25E medium speed diesel engines each rated 2,800 kW at 750 rpm, and each driving a Voith Schneider 32R5-265-2 cycloidal propeller through model 1330 DTL Voith Turbo Couplings.

 

The electrical plant consists of three identical Caterpillar C 7.1 diesel gensets, each with a power output of 150 ekW, 50 Hz, 400 V.

 

FIFI 1 capability is provided by two Fire Fighting Systems (FFS) SFP 250x350 XP horizontal centrifugal pumps of 1450 m3/hr each, driven off the front of each main engine. Remote operated monitors are one model FFS1200LB with1200 m3/hr sea water capacity and one model FFS1200/300LB with 1,200/300 m3/hr sea water/foam capacity.

 

The deck machinery features an Ibercisa Model MR-H/200/2/300-80, double drum, hydraulic escort towing winch. Winch low speed pull at first layer is 75.5 metric tons at 8.4 m/min. and rendering capacity is 120.8 metric tons at 13.4 m/min. Brake holding load is 200 metric tons. Aft towing hook is a Mampaey Offshore Industries B.V. type, rated 100 metric tons SWL. Also on the aft deck is a Cytecma CM214/5SL 14.5m/1T utility deck crane.

 

Ship-handling fenders at the stern comprise an upper row of 800 mm diameter cylindrical fender and a lower course of W-fender. Sheer fendering consists of 300 mm D-rubber. Three rows of 300 mm “D” type fendering are fitted at the bow.

 

Typical of Robert Allan Ltd. tug designs, significant noise and vibration reduction measures have been implemented throughout, including resiliently mounted main engines, resiliently mounted gen-sets and auxiliary engine, high attenuation engine exhaust silencer systems, ventilation intake air silencers, sound dampening deck treatments and other critical insulation measures.

 

On trials, VB Xaloc met or exceeded all performance expectations, with the following results:

 

The VB Xaloc will commence operations in the Port of Valencia, Spain immediately.