Turbines News

Mitsubishi Heavy Industries has demonstrated a 100kW class cryogenic organic Rankine cycle (ORC) power generation system using a nitrogen-based, oilless cryogenic turbine generator.ORC systems are able to harness lower-temperature heat than typical waste heat recovery systems, and MHI says the use of liquid nitrogen as the cryogenic energy source provides a stable refrigerant cycle and the specified regeneration output without freezing-induced clogging. It performs well even under…

China Merchant Heavy Industry (CMHI) has ordered 6 × MAN 12V32/44CR main engines in connection with the building of a new 5,000-tonne floating installation crane vessel – already christened ‘Les Alizés’ – for Jan De Nul Group.Delivering a cumulative output of 43,200 kW, the common-rail engines will each feature an enhanced, MAN-supplied SCR (Selective Catalytic Reduction) system for IMO Tier III-compliance, and will also meet the even-stricter Euro Stage Vcompliant NOx-emission limit.

The Italian company EmiControls has been working on innovative fire protection solutions worldwide since 2011. With the FT10e water mist turbine, EmiControls has launched a product that gives companies more safety in the fight against fires. This is a brief Case Study of an FT10e installation at the Recycling Center Santini in Northern Italy.EmiControls develops stationary and mobile firefighting turbines. EmiControls combines the high efficiency of water mist with an advanced turbine technology.When extinguishing fires, water mist achieves a higher cooling effect than a traditional water jet.

MHI Vestas Offshore Wind has signed a firm order with Akita Offshore Wind Corporation (AOW) to supply turbines for the Akita Noshiro Offshore Wind Farm (OWF) Project. This is the first firm order in Japan for the Danish wind turbines manufacturer."In a sector first for a utility-scale project in Japan, MHI Vestas Offshore Wind has completed firm and unconditional orders to supply turbines for the Akita and Noshiro offshore wind farms, jointly referred to as the Akita Noshiro Offshore Wind Farm Project," said a press release from the company.The wind farms have an expected combined output of 139 MW.MHI Vestas will supply 33 V117-4.2 MW turbines in total, to be installed with fixed-bottom foundations at both sites.

The giant offshore wind farm (OWF) project in the Moray Firth, off Scotland has finished pin piling work for 100 turbines and three substations at the site.The 950MW Moray East offshore wind development confirmed it has installed 309 pin piles using the jack-up installation Apollo vessel which worked out of Cromarty Firth Ports Authority’s onshore handling facilities at Invergordon.Work to install the pin piles in the sea-bed commenced in May 2019, it noted in a press release.Project Director for Moray East, Marcel Sunier said: “The important first phase of offshore installation works have been completed safely and successfully without any major incidents.

Offshore wind farm vessels provider Fred. Olsen Windcarrier announced that its jack-up vessel Blue Tern has been contracted to finish installing the remaining 11 Senvion 6.2M152 turbines on the Trianel Windpark Borkum II (TWB II).“We are looking forward to working with our new client and to get the chance to support the finalization of the Trianel wind farm with our jack-up vessel Blue Tern. Blue Tern is ideal for this project due to her capacity”, said Kristina Pind Løvgren, Head of Nautical, Fred. Olsen Windcarrier.Kristina added: "Our related company, Global Wind Service, is already on the project and delivers technicians, QA and Site Management for the installation and mechanical completion of the turbines.

MHI Vestas Offshore Wind, the global wind turbine manufacturer, has selected ABB’s Power Grids business to deliver its WindSTAR transformers for the Triton Knoll offshore wind project in the UK.ABB’s WindSTAR power transformers are designed to fit inside the wind turbine and can withstand strong vibrations, sudden movements and variable electrical loading, typical of wind power. This lightweight transformer is energy efficient and made with biodegradable and safe ester insulation fluid.MHI Vestas will deliver 90 wind turbines for the wind farm and ABB’s WindSTAR transformers will be installed in each turbine. A joint venture between Vestas Wind Systems A/S and Mitsubishi Heavy Industries Ltd…

Spanish electric utility company Iberdrola will build its next wind farm in the country at the Herrera Complex, featuring Siemens Gamesa’s SG 4.5-145 wind turbines with a 4.5MW power unit.Wind turbines which will be delivered by Siemens Gamesa are considered to be seven times more powerful than the turbines installed in the country two decades ago.Iberdrola is, thus, continuing to advance in its commitment to clean energy in Spain, incorporating cutting-edge technologies to provide more competitiveness and sustainability to its renewables projects, claimed a press note from the company.The Herrera Complex, which will be built in Burgos province…

Climate Fund Managers (CFM), the manager of the Climate Investor One facility (CI1), have announced that construction has begun of its 48MW near-shore wind farm in Tra Vinh province Vietnam.CI1’s Construction Equity Fund has committed USD 71 million to the project company, “Tra Vinh Wind Power Company”, which is jointly funded by Korean energy firm ST International. Vestas, the pioneering global supplier of wind turbines will act as EPC for the project.The collaboration makes use of ST International’s extensive knowledge of the Asian energy market, Vestas’s expertise in developing, constructing and operating wind power facilities, and CI1’s innovative end to end financing solution.As one of the fastest-growing Asian economies…

German wind turbine builder is carrying out a condition monitoring campaign at the 402MW Veja Mate offshore wind farm in the German North Sea.The rotor blade condition monitoring system or fos4X “retroX” system, consisting of a sensor platform and intelligent software, was installed on strategically selected 10% of the wind farm’s turbines."The system enables structural condition monitoring of the rotor blades, recording of loads during turbine life time as well as the detection of yaw and pitch misalignment," said a press note from the specialist in fiber optic measurement technology and sensor technology.A further aspect of the joint project carried out by fos4X is the monitoring, consolidation and orchestration of the entire turbine and subsystem data.

Dutch outfit TMA Logistics has been commissioned by Siemens Gamesa Renewables Energy (SGRE) to provide the transhipment and transhipment of wind turbines for Windpark Fryslân.Wind farm Fryslan comprises 89 wind turbines that will be realised in the Frisian part of the IJsselmeer, near Breezanddijk. The project is expected to start in August 2020 and the wind farm will supply electricity to ± 500,000 households.SGRE is carrying out the project in close cooperation with Van Oord Offshore Wind BV. Van Oord is laying the foundations and laying the cables and monopiles. These monopiles will most likely also be delivered via the TMA terminal.All foundation piles are produced in Rostock, Germany, weigh 220,000 kilos each and are approximately 42 meters long.

Danish wind turbines manufacturer  Vestas Wind Systems secured a 50 MW order with Cong ty Co Phan Dau Tu Dien Gio Hoa Binh 1 (Hoa Binh 1 Company), a company owned by Phuong Anh Group. The order marks Vestas' third intertidal project in the country with three different customers announced this month, which makes the company leads the market for wind energy in Vietnam with almost 200 MW of projects.The project will be located in Hòa Bình, a district of Bạc Liêu Province where the turbines will be installed in shallow waters close to shore to exploit the full potential of the Mekong Delta region's good wind conditions.The contract includes…

Sif Holding, the manufacturer of large steel tubulars, has entered into exclusive negotiations for the delivery of 33 monopiles and 33 Transition pieces (25 KTon steel) for an offshore wind project in Japan.The current state of negotiations has led to a pre- order of the steel for the project, said the Netherlands-headquartered company, which provides steel foundations to the offshore wind, oil and gas markets.Manufacture of the MP/TP-foundations and disclosure of project details is subject to the issue of a Notice To Proceed (NTP) by the client, it said.Sif’s orderbook for 2020 now has approximately 175 Kton of which 25 Kton under exclusive…

MHI Vestas Offshore Wind (MVOW) announced that the first turbine has been installed at Northwester 2 in Belgium, the world’s first offshore wind park to feature the record-breaking V164-9.5 MW turbine.The 219 MW project, Northwester 2, is the first offshore wind park in the world to deploy the V164-9.5 MW turbine from MHI Vestas. The project will consist of 23 V164.9-5 MW turbines to spin 50 km off the coast of Ostend in Belgium.Northwester 2 is the fourth collaboration between Parkwind and MHI Vestas in Belgian waters, soon providing a combined output capacity of 765 MW in the country.“The installation of the world’s first commercial wind turbine exceeding 9 MW is an exceptionally proud moment for our company,” said MHI Vestas Chief Operations Officer Flemming Ougaard.

Danish wind turbine installation and service company Global Wind Service (GWS) has secured a contract to support MHI Vestas on the Northwester 2 offshore wind project by providing technicians for the installation of turbines.The deal includes GWS offshore installation technicians supporting the installation of 23 MHI Vestas 164-9.5MW turbines at the site offshore Belgium from November.GWS is also supporting MHI Vestas with pre-assembly activities on Northwester 2 through its base in Vlissingen.“We are grateful to MHI Vestas Offshore for the opportunity to support the first offshore installation of their V164 9.5MW WTGs and we very much look forward to mobilizing our experienced personnel for this important project.

Swiss multinational equipment manufacturer Liebherr Group said that its cranes erected the prototype of what is currently the most powerful offshore wind turbine in the world in the Dutch port of Rotterdam.The gondola of the wind turbine, which measures an overall 207 meters in height, has a net weight of 675 tonnes. It was the heaviest load for the two Liebherr crawler cranes used for the job. In a tandem hoist, the two LR 11350 cranes managed a gross load of 780 tonnes and placed the massive component onto the 150 meter tower for the gigantic turbine.General Electric (GE) unveiled this 12 Megawatt with the name “Haliade-X 12 MW” in October…

Dutch maritime contracting company Van Oord is partnering with compatriot company Hendrik Veder Group for the management of heavy lifting equipment for offshore wind turbines.Rotterdam-based company active in steel wire and fibre rope products and services said that under the terms of the two-year agreement, Van Oord will outsource its hoisting and lifting equipment management to the Hendrik Veder Group, with a focus on sustainable lifting.According to Michiel Pieterman, Offshore Wind Operations Manager at Van Oord: "This partnership enables us to use lifting equipment in a sustainable way. The high-quality lifting equipment has a longer lifespan, because it is either reused or converted into new raw materials, while guaranteeing 100 percent compliance at all times.

Penta-Ocean Construction, Kajima Corporation, and Yorigami Maritime Construction have agreed to jointly construct a wind farm installation vessel capable of installing foundations and turbines with a capacity of between 10MW and 12MW.The three Japanese companies have ordered a jack-up vessel with a 1600-tonne lifting capacity for work in the domestic offshore wind sector.The multipurpose self-elevating platform (SEP) ship holding company will be established as a subsidiary of Penta-Ocean Construction Co., Ltd. and it will be operated jointly by the three companies.In light of the enactment of relevant regulations which promote offshore wind power generation in the general sea areas in addition to the port and harbor areas…

Spanish global renewable energy company Siemens Gamesa Renewable Energy (SGRE) has been selected as the preferred supplier of turbines for the 300MW Hai Long 2 offshore wind project in Taiwan.The agreement is subject to contract and final investment decision from the consortium partners, Canadian independent power producer Northland Power Inc. and Taiwan-based developer Yushan Energy.The 300 MW Hai Long 2 offshore wind power plant project was awarded through the 2018 grid allocation mechanism in Taiwan. The project site is located approximately 50 kilometers off the coast of Changhua County. The project will utilize SGRE’s existing footprint and supply base in Taiwan in order to fulfil localization requirements on the project.

GE Renewable Energy has generated first power from its 12MW Haliade-X prototype - the world's largest and most powerful wind turbine - located at Maasvlakte, the Port of Rotterdam.According to GE, local teams will now proceed with the testing phase, during which different types of measurements will be performed to obtain a Type Certificate for the Haliade-X in 2020.John Lavelle, CEO of Offshore Wind at GE Renewable Energy, said “This first kWh is a critical achievement for our whole team, bringing to fruition our vision and all the hard work put in place. Innovation is part of GE’s DNA, and having successfully powered the world’s first 12 MW wind turbine, this illustrates it perfectly.

Taiwanese marine joint venture (JV) company CSBC-DEME Wind Engineering (CDWE) has signed two contracts for the transport and installation of foundations and turbines at the 300MW Zhong Neng offshore wind farm (OWF).The JV between Taiwanese outfit CSBC and Belgian contractor DEME Offshore will aim to deliver the project, owned by China Steel Corporation (CSC), in 2024.The 300 MW Zhong Neng offshore wind farm, developed by China Steel Corporation, is planned for completion in 2024. In order to implement the localisation policy required by the Taiwanese government, the Zhong Neng Wind Power Corporation Preparatory Office has worked closely with CDWE, with the aim of maximising local content.

The blade for GE’s Haliade-X 12MW offshore wind turbine has arrived at MassCEC’s Wind Technology Testing Center (WTTC) in Boston, U.S.The 107-meter blade will undergo a series of fatigue tests that involve moving it millions of times over the period of a few months to validate that it can withstand more than 25 years of operation at sea. The testing is part of the process of commercializing GE’s Haliade-X 12 MW turbine -- the most powerful in the industry -- by 2021, strengthening the company’s ability to compete in a market steadily gaining momentum in the U.S. and globally.“This has really been a collaborative effort on the part of the company to be part of solving the challenges associated with the energy transition," said GE Chairman and CEO H. Lawrence Culp, Jr.

Chinese wind turbine manufacturer Goldwind is the world’s first OEM to receive DNV GL’s Component Certification for its LiDAR Assisted Control system.The certificate is issued according to DNV GL’s own Type and Component Certification Service Specification in conjunction with the Recommended Practice for new Technology Qualification.LiDAR, which stands for “Light Detection And Ranging”, is a technique where a laser source is used to sense the incoming wind field in front of a wind turbine rotor. Its application to wind turbine control systems facilitates the reduction of loads on certain components such as the tower and blades, improves…