Heavy Lift Vessel Heads to St. Simons Sound for Golden Ray Salvage

Maritime Activity Reports, Inc.

October 26, 2020

The twin-hull heavy lift vessel VB 10,000 at the Port of Fernandina, Fla. in July for modifications and function checks. The two 255-foot tall gantries will use lengths of chain to cut the capsized vessel Golden Ray into eight pieces and lift them onto barges for eventual transportation to Louisiana for recycling. (Photo: John D. Miller / U.S. Coast Guard)

The twin-hull heavy lift vessel VB 10,000 at the Port of Fernandina, Fla. in July for modifications and function checks. The two 255-foot tall gantries will use lengths of chain to cut the capsized vessel Golden Ray into eight pieces and lift them onto barges for eventual transportation to Louisiana for recycling. (Photo: John D. Miller / U.S. Coast Guard)

A specialized heavy-lift vessel departed the Port of Fernandina, Fla. Monday en route to Georgia's St. Simons Sound, where it will be used by salvage crews to cut and lift sections of the capsized car carrier Golden Ray.

The U.S. flagged VB 10,000 is expected to reach the St. Simons Sound in the early hours on Tuesday and remain on scene for a minimum of eight weeks, plus any extra time required for weather stoppages or other unforeseen circumstances, Michael Himes, public information officer for the St Simons Sound Incident Response told MarineLink.

The Korean-owned Golden Ray, which ran aground and overturned shortly after leaving the Port of Brunswick in September 2019, will be dismantled in place and removed in sections. Salvors have installed 16 lifting lugs on the wreck to provide connection points for the VB 10,000, which has two 255-foot tall gantries that will use lengths of chain to cut the RoRo vessel into eight pieces and lift them onto barges for transportation to Gibson, La. for recycling. Sections containing cars will be unloaded in a drydock near the wreck site prior to being transported to Louisiana.

“The arrival of the VB 10,000 has been highly anticipated. It’s a very capable asset implementing the latest in heavy-lifting technology for marine environments,” said Cmdr. Efren Lopez, Federal On-Scene Coordinator. “The vessel is a critical component to our removal plan that ensures the safety of our responders and the public as we move forward and remove the Golden Ray.”

Throughout the cutting and lifting operations, Versabar's VB 10,000 team of roughly 50 crew members will be sequestered at a local lodging area, Himes said. The response team said it set up the health safety “bubble” to mitigate coronavirus exposure and ensure responder safety during removal operations.

The response team has also established a 150-yard safety zone around the Golden Ray's environmental protection barrier (EPB), and it is advising mariners and to steer clear of the wreck site.

The Golden Ray wreck remains stable and is being monitored continuously by sensors and during hydrographic surveys around the EPB. An environmental unit and pollution response teams continue to monitor the shoreline and wreck site, reporting no emergent environmental concerns.

The complex salvage project has encountered a number of delays relating to difficult environmental conditions, a COVID-19 outbreak among crew and most recently mooring system adjustments for the VB 10,000.

Maritime Reporter E-News subscription

Maritime Reporter E-News is the maritime industry's largest circulation and most authoritative ENews Service, delivered to your Email five times per week

Subscribe for Maritime Reporter E-News