New Propulsion Couplings to Launch at Workboat

Maritime Activity Reports, Inc.

October 2, 2014

  • Image: Renold Hi-Tec Couplings
  • Image: Renold Hi-Tec Couplings
  • Image: Renold Hi-Tec Couplings Image: Renold Hi-Tec Couplings
  • Image: Renold Hi-Tec Couplings Image: Renold Hi-Tec Couplings

Renold Hi-Tec Couplings, of Halifax, U.K., will debut a new range of high temperature, marine propulsion rubber-in-compression couplings on booth 3809 at the International Workboat Show in New Orleans from December 3-5, 2014.

The new HTB-MP range is a second generation of couplings based on the existing HTB-GS range. According to the manufacturer, the intrinsically fail-safe nature of rubber-in-compression couplings ensures continuous operation and avoids the loss of drive that could be experienced with other coupling types as a result of failure.

Suitable for use in high temperature applications the new couplings have a blind assembly construction allowing easy mounting inside bell housings. They have been designed to operate in only one direction so that half of the rubber blocks will always be driving, or leading, and the remainder will always be trailing. Renold Hi-Tec's engineers were able to reduce the size of the trailing rubber blocks, as they do little work, and this has enabled the overall size of the coupling to be reduced too. The resulting reduction in the coupling's weight and inertia decreases the bending moments on the drive shaft.

Although the couplings only operate in one direction they can be supplied to operate either clockwise or anti-clockwise. They have interchangeable rubber and metal components, except for the cover that ensures the correct direction of operation. The lead blocks carry all the torque and are specially selected for each application to provide optimum control of resonant torsional vibration. They also provide severe shock load protection from transient conditions ensuring continues operation of the driveline.

Renold Hi-Tec's engineers can adapt the new HTB-MP couplings to meet customers' requirements. Once installed they are completely maintenance free, requiring no lubrication or adjustments, resulting in low running costs, Renold Hi-Tec said. The couplings are designed to work in extreme temperatures from -50 to +200 degrees C. Sixteen frame sizes are currently available for engine flywheels from SAE 10 to 21 and torques up to 53.3 kNm.

Maritime Reporter E-News subscription

Maritime Reporter E-News is the maritime industry's largest circulation and most authoritative ENews Service, delivered to your Email five times per week

Subscribe for Maritime Reporter E-News